DATA SHEET SATIN POLYURETHANE VARNISH V2 Varnished polyurethane 2 components, of great hardness, especially conceived for an excellent behaviour with the marine atmosphere. CHARACTERISTICS This varnish is very effective against abrasion, it does not turn yellow and therefore can be used as a protective varnish on polyurethane lacquers SL2. On exterior wood, thanks to its great toughness, it offers ideal protection against bad weather while maintaining great flexibility. PREPARATION OF THE SURFACE On new wood: Sand the surface with dry 150-180 grain sandpaper, then apply a first coat of very dilute varnish (30-50%) to obtain good penetration of the varnish into the surface. On wood that is already varnished: Make sure that the old varnish is a dual component polyurethane, then sand down with dry 240 grain sandpaper. On polyurethane lacquer SL2: Perform an egrenation of the lacquer and dust well. APPLICATION Apply two 30 microns (dry film) coats of varnish V2, wet on wet, or apply 2 coats leaving 24 hours between the two with intermediate sanding. SOROMAP PEINTURE VERNIS ZA de Beligon – 1 Rue Maurice Mallet 17300 ROCHEFORT S/MER Tél : 05 46 88 36 13 • Fax : 05 46 88 36 25 • Email : william.thoma

PRECAUTIONS FOR USE Keep out of reach of children. Use protective gloves, solvent protective masks and clothes Work in a ventilated area, an accumulation of solvents can catch fire if exposed to a naked flame or a spark. HEALTH AND SAFETY See data sheet This information corresponds to the actual state of our knowledge and has the sole object of informing you about our products and possible applications. It is objectively given but does not imply any guarantee by us. Our company may modify all these details at any time SOROMAP PEINTURE VERNIS ZA de Beligon – 1 Rue Maurice Mallet 17300 ROCHEFORT...