DATA SHEET EPOXY RESIN SO184UV The SO184 RESIN is a reactive system which has been developed in order to add ease and convenience to mechanical qualities. The versatility of this system makes it suitable for lamination or high-quality glazing, while eliminating the problems of crystallisation due to extended storage. Because of its viscosity, SO184 RESIN (resin + hardener) can be used for impregnation of glass fibre, kevlar and carbon, which providing the laminate with good mechanical properties. These qualities can be further improved after curing by later oven baking. Its suitability for glazing is complemented by an excellent stability under ultra-violet. The reactivity of the system over 18°C (the minimum working temperature), results in fast curing with no scaling or whitening of the surface. Not to use at a temperature lower than 14°C (temperature of the air and support), in the case of a glazing not to put the support outside (moisture and cold before 72 hours). PHYSICAL CHARACTERISTICS Density: Appearance: Viscosity at 20°C: Mixing in weigth: Mixing in volume: PROPERTIES AFTER HARDENING Curing Traction modulus (Mpa) Traction Max strength (Mpa) Extension at max. str % Bending top break (Mpa) Breaking strength (Mpa) Charpy impact (mm) Charpy résilience (KJ/m²) TG mx (°C) PRECAUTIONS FOR USE The working stations must be correctly ventilated. Any resin handling must be done using gloves. In the event of contact with the skin, to wash immediately with water and the soap. The use of solvents on the skin is to be proscribed. In the event of projection in the eyes, to rinse immediately and abundantly with water clear and to consult a doctor. Take care of the technical qualification and the information of the people called to handle or to be in contact with the products. HEALTH AND SAFETY See data sheet This information corresponds to the actual state of our knowledge and has the sole object of informing you about our products and possible applications. It is objectively given but does not imply any guarantee by us. Our company may modify all these details at any time SOROMAP PEINTURE VERNIS ZA de Beligon – 1 Rue Maurice Mallet 17300 ROCHEFORT S/MER Tél : 05 46 88 36 13 • Fax : 05 46 88 36 25 • Email : william.tho