Catalogs >
GROUPE SOROMAP >
POLYMOUSS

POLYMOUSS
1Pages

Catalog excerpts

DATA SHEET TWO COMPONENTS POLYURETHANE FOAM POLYMOUSS The two components polyurethane foam is totally formulated, contains catalyst and additive. Expanded only with water and mixing with isocyanates (MDI). This foam is generally used for the float chambers of pleasure boats, floating pontoons and bouys. Expansion agent: Water % closed cells: 95 % +- 3 % (indicative value). PHYSICO-CHEMICAL CHARACTERISTICS Chemical base Appearance Colour Viscosity at 20°C Density Flash point Base Polyol viscous liquid Amber 850 cps 1220 g/l > 60°C Activator Isocyanate (MDI) Fluid liquid Brown 220 cps 1230 g/l > 60°C PREPARATION OF PRODUCT Mix the necessary quantity of base and activator to obtain the desired volume of expanded foam: A/B ratio by weight: 100 / 117 A/B ration by volume: 100 / 100 Product temperature: 22 – 30°C The temperature of the chemicals must be set correctly before implementation to get the proper level and viscosity reactivity. PRECAUTIONS FOR USE Work in a well ventilated area. Do not smoke while using, and keep away from all sources of ignition. Product is irritating to the eyes, the respiratory tract and the skin. Use protective gloves, goggles and a breathing mask. In the case of contact with eyes or the skin, rinse copiously with clean water. HEALTH AND SAFETY See data sheet This information corresponds to the actual state of our knowledge and has the sole object of informing you about our products and possible applications. It is objectively given but does not imply any guarantee by us. Our company may modify all these details at any time SOROMAP PEINTURE VERNIS ZA de Beligon – 1 Rue Maurice Mallet 17300 ROCHEFORT S/MER Tél : 05 46 88 36 13 • Fax : 05 46 88 36 25 • Email : william.thomas@soroma

Open the catalog to page 1