DATA SHEET PASSIVATION AND RUST REMOVAL APPLICATION The product comes ready for use, and is applied either pure or diluted to 50% with water. It is applied by brushing or spraying. When sprayed, treat the parts using a minimum of product, in order to avoid runs. PASSIVNET should be left to dry and not rinsed. If you wish to paint the treated surface, wait for about 2 weeks in order to develop maximum adhesion qualities and long life. If you wish to paint within 48 hours following phosphating, first rinse with water to remove all traces of acid. PRECAUTIONS FOR USE Wear gloves and goggles. In case of contact with the skin or the eyes, rinse with plenty of water and consult a specialist. Keep out of reach of children. If swallowed, consult immediately a doctor and show him the label or the container. HEALTH AND SAFETY See data sheet This information corresponds to the actual state of our knowledge and has the sole object of informing you about our products and possible applications. It is objectively given but does not imply any guarantee by us. Our company may modify all these details at any time SOROMAP PEINTURE VERNIS ZA de Beligon – 1 Rue Maurice Mallet 17300 ROCHEFORT S/MER Tél : 05 46 88 36 13 • Fax : 05 46 88 36 25 • Email : [email protected]