1. Catalogs
  2. GROUPE SOROMAP
  3. HULL AND DECK RETOUCHING PAINT

HULL AND DECK RETOUCHING PAINT

HULL AND DECK RETOUCHING PAINT

Product catalog summary
Product Overview: The Hull and Deck Retouching Paint is designed for retouching polyester gelcoat surfaces after sanding. It is available in a liquid form and packaged in a 200 ml aerosol.
Physical Characteristics: The paint is liquid with a flash point of less than 21°C, is not soluble, and is denser than the surrounding area.
Surface Preparation: Surfaces must be clean, dry, and free of grease before application.
Application Instructions: Shake the aerosol until the ball inside makes a clear sound. In cold weather, warm the aerosol to approximately 30°C using a water bath. Spray a small test area first, then apply in a regular, cross-layered motion from a distance of 25 to 30 cm.
Packing and Storage: The product is stored in aerosol form and should be kept between 5 to 40°C.
Precautions for Use: The container is pressurized and should be protected from sunlight and temperatures above 50°C. Do not puncture or burn the container, even after use. Avoid spraying near flames, inhaling vapors, and contact with eyes and skin. Smoking, eating, and drinking should be avoided during use. Keep out of reach of children.
Health and Safety: Refer to the data sheet for detailed health and safety information. The information provided is based on current knowledge and is intended to inform about the product and its applications without any guarantee.
See more

Catalog excerpts

HULL AND DECK RETOUCHING PAINT-1

PREPARATION OF THE SURFACE Carefully prepare the surfaces to be painted. The surface must be clean, dry and grease free APPLICATION Shake the aerosol (the ball inside must make a clear sound). In cold weather, to heat the aerosol with the bath Marie (30°C approximately). First, spray onto a small surface. To pulverize of a regular movement and in layers crossed at a distance from 25 to 30 cm of surface to paint. PRECAUTIONS FOR USE Pressurised container. Protect from sunlight. Do not expose to temperatures highter than 50 degrees. Do not puncture or burn even after use. Do not spray towards a flame or an incandescent substance. Do not breathe vapours. Avoid the contact with eyes and skin. Do not smoke. Do not eat and drink when using. Keep out of reach of children. HEALTH AND SAFETY See data sheet This information corresponds to the actual state of our knowledge and has the sole object of informing you about our products and possible applications. It is objectively given but does not imply any guarantee by us. Our company may modify all these details at any time SOROMAP PEINTURE VERNIS ZA de Beligon – 1 Rue Maurice Mallet 17300 ROCHEFORT S/MER Tél : 05 46 88 36 13 • Fax : 05 46 88 36 25 • Email : [email protected]

 Open the catalog to page 1

All GROUPE SOROMAP catalogs and brochures

  1. SC20

    2  Pages

  2. PR20

    2  Pages

  3. AC10

    1  Page

  4. AC20

    1  Page

  5. TO26

    2  Pages

  6. SL2

    2  Pages

  7. V2

    2  Pages

  8. AFC+

    2  Pages

  9. AF2 Racing

    2  Pages

  10. NAUTI PU

    1  Page

  11. THICK PRIMER

    1  Page

  12. STRAT SO175

    1  Page

  13. SO184

    1  Page

  14. MONOMOUSS

    1  Page

  15. POLYMOUSS

    1  Page

  16. POLISH PLEXI

    1  Page

  17. PASSIVNET

    1  Page

  18. Soromap 2017

    292  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.