Guardian IP Series Dispensing Systems to ap ply Polyurea, Elastomeric Coatings, Polyurethane Foam and Adhesives Optional Accessories and Process Components Delayed Air Purge for the Probler P2 (In-Plant Applications) Dispense Cycle Counter 23997-00 23996-00 Patent Pending In specific pour applications and some other specialized spray processes, the air used to purge-clean the mix area of the Probler P2 automatically upon trigger release needs to be delayed because of the unique application and quality demands of the pour or spray application (e.g. filling small cavities or vessels). By adding the Delayed Air Purge kit option to the Probler P2, you can build a 1/2 second to 15 second buffer delay from the time the trigger is released after dispense until the air purge is activated to clean the mix area of the gun. This time delay allows the operator to move the gun away from the application area and eliminates any adverse effects the air purge might have on the specific process or quality demand. In numerous pour applications, the cavity being filled requires exact and repeatable volumes of material to properly complete the job. The Dispense Cycle Counter will allow you to select a predetermined number of pump cycles (volume). When the trigger is activated, the counter will automatically stop the dispense operation when the selected settings are recorded and reached. The Dispense Cycle Counter is easy to program and can be quickly disengaged for manual operation when needed. Note: The Delayed Air Purge can also be incorporated with the Dispense Cycle Counter option Protective Coatings Spa Manufacturing Architectural & Theme Park Probler P2 with Delayed Air Purge & Dispense Cycle Counter Option Independent Digital Controllers for ISO, Poly, & Hose Heat 200' Heated Hose Capabilities New Design ISO Piston Lubrication System Option Foam lled window frame & chilled storage frame using the Probler P2 with the optional GlasCraft Stream Jet Nozzle (p/n 23983-01) and Delayed Air Purge / Dispense Counter Foam-In-Place / Packaging Guardian A Series system with Delayed Air Purge and Dispense Counter Pour Adapter Chop Fibers 23984-00 23942-01 Adapter for B-410 23942-02 Adapter for B-510 When a pour application requires adapting the Probler P2 to dispense a column of polyurethane to fill any type cavity or void, the 23984-00 Pour Adapter can quickly and easily be affixed to the Probler P2. Modular Heater System in 3000, 6000, or 12000 watt Compact, Portable Design is Able to Fit Through Doorways Only available on the Probler P2 Elite. Probler P2 with Pour Adapter option Note: When using the 23984-00 Pour Adapter option, we recommend the use of ¼” tubing (P/N 9704-11) to better control and direct the urethane being dispensed (as shown above). Large Pumps = Less Wear There are many new applications for adding chop fibers to foam or coatings. These fibers can act as filler or be structural depending on the length and percent of the fibers. These new applications include FRP replacement projects for open mold production. Marine Flotation Foam Probler P2 Elite with B-410 chopper attachment 5845 West 82nd Street, Indianapolis, IN 46278 Phone: 317-875-5592 Fax: 317-875-5456 Email: [email protected] www.glascraft.com © 2007 GlasCraft, Inc. High Pressure, Spray-on Bed Liner GC 5041 Foam Filled Window Frames Sprayfoam For Mold Plugs

Guardian IP Series Bigger is Better!!! GlasCraft’s fluid pumps are 200% to 400% larger than the competition. GlasCraft pumps cycle 50% to 75% less than the competition. The large size of GlasCraft’s fluid pumps means that the same amount of material is pumped using less pump cycles, with less wear and tear on the seals, and resulting in less maintenance and machine downtime than the competition. Advantages of a larger fluid section that impact both performance and your pocketbook are: • Fewer stroke changes results in less stress and wear on pump seals. This means longer seal life, less maintenance,...

Guardian IP Series Bigger is Better!!! GlasCraft’s fluid pumps are 200% to 400% larger than the competition. GlasCraft pumps cycle 50% to 75% less than the competition. The large size of GlasCraft’s fluid pumps means that the same amount of material is pumped using less pump cycles, with less wear and tear on the seals, and resulting in less maintenance and machine downtime than the competition. Advantages of a larger fluid section that impact both performance and your pocketbook are: • Fewer stroke changes results in less stress and wear on pump seals. This means longer seal life, less maintenance,...

Guardian IP Series Dispensing Systems to ap ply Polyurea, Elastomeric Coatings, Polyurethane Foam and Adhesives Optional Accessories and Process Components Delayed Air Purge for the Probler P2 (In-Plant Applications) Dispense Cycle Counter 23997-00 23996-00 Patent Pending In specific pour applications and some other specialized spray processes, the air used to purge-clean the mix area of the Probler P2 automatically upon trigger release needs to be delayed because of the unique application and quality demands of the pour or spray application (e.g. filling small cavities or vessels). By adding...