VRM™ and VPM™ Metering Systems Variable Ratio Metering Systems for Resin and Paste Applications High-volume dispensing equipment for maximized productivity • High flow rates provide faster cycle times to improve your productivity • Accurate, on-ratio dispense means less waste, more profits • Variable ratio allows flexibility for different materials or temperature variations • Intuitive, easy-to-use controls cut training time and reduce operator error • Well-suited for rotor blade production in the wind energy market PROVEN QUALITY. LEADING TECHNOLOGY.

Expand your capacity with high-volume metering system Graco VRM™ Metering System for resin applications The Graco VRM Metering System is a hydraulic variable ratio metering system that uses positive displacement pumps to dispense resin materials. High ow rates • Meets demands for increased production requirements • Delivers accurate continuous material ow and shot dispensing as well • Up to 30 kg (66 lb) per minute Accurate, on-ratio mixing • Results in higher yield, less material waste and more process condence • Ratio accuracies better than +2 % Variable ratio • Allows you to change ratios...

s from Graco Graco VPM™ Metering System for high-viscosity applications The Graco VPM Metering System is a hydraulic variable ratio metering system that uses positive displacement pumps to dispense tooling pastes, adhesives and other high-viscosity materials. High ow rates • Speeds production with high-volume dispensing • Delivers accurate continuous material ow and shot dispensing as well • Up to 25 kg (55 lb) per minute Ratio assurance • Accurate, on-ratio mixing results in better yield, less material waste, less scrap • Ratio accuracies better than +2 % Variable ratio • Allows you to change...

Technical Specications & Ordering Information Everything you need to make an informed decision Technical Specications Models Mixing ratio Fluid viscosity range Thixotropic paste Power supply Ratio accuracy Shot accuracy better than +2% Shot accuracy better than +2% Shot sizes For typical resin infusion materials For typical bonding and tooling pastes Part numbers Operation and repair manual * Values are dependent on mixing ratio, viscosity, temperature and installed pump size. Values shown are for largest available pump size. All written and visual data contained in this document are based on...