Exhibit with us
*mynauticexpo  
English
  1. Catalogs
  2. GN Rope Fittings
  3. H11

H11

H11
1 / 1 PageView full catalog

H11

Product catalog summary
Overview: The document provides technical specifications and details for GNROPE fittings, specifically focusing on heavy-duty double nut shackles, type H11, manufactured by Grofsmederij Nieuwkoop B.V. in the Netherlands.
Material and Safety: The shackles are made from forged alloy steel that is quenched and tempered. They have a safety factor of five times the working load limit (WLL) and are galvanized with stainless steel cotter pins. They are designed to operate in temperatures ranging from -40°C to +200°C and are polar rated.
Certification: The shackles come with a Certificate of Conformity and a 3.1 material certificate according to EN 10204 standards. Non-standard sizes or custom products can be requested.
Usage Recommendations: It is advised to ensure the load is centralized on the pin. If there is excessive space in the jaw gap, washers should be used.
Product Specifications: The document lists various shackles with different WLLs ranging from 34 tons to 250 tons and corresponding minimum breaking loads (MBL). Dimensions such as A, B, C, D, E, L, X, and Y are provided in millimeters, along with the weight in kilograms.
Special Notes: Shackles with WLL of 34 tons and 60 tons are not supplied with an eyebolt. Tolerances for inside length are ± 7.5%, all other forged parts are ± 5%, and machined parts are ± 1 mm.
See more

Catalog excerpts

H11-1

TYPE H11 Material Safety factor Finish Temperature range Standard certification Forged alloy steel quenched and tempered 5 times Galvanised with stainless steel cotterpins -40°C up to +200°C; Polar Rated Certificate of Conformity 3.1 material certificate EN 10204 Non-standard sizes or custom products available on request Note: Ensure that the load is centralized on the pin When there is too much space in the jaw gap, we advise to use washers * Shackles WLL 34 ton and 60 ton are not supplied with an eyebolt Tolerance: Inside length ± 7.5%, all other forged parts ± 5%, machined parts ± 1 mm GNROPE fittings Grofsmederij Nieuwkoop B.V. - The Netherlands www.gnweb.com, [email protected] Tel: +31(0) 172 579 303, Fax: +31(0) 172 571 073

 Open the catalog to page 1

All GN Rope Fittings catalogs and brochures

  1. H10
    H10

    1  Page

  2. H10 SUPER
    H10 SUPER

    1  Page

  3. H14
    H14

    1  Page

  4. H12
    H12

    1  Page

  5. D15
    D15

    1  Page

  6. D14
    D14

    1  Page

  7. D16
    D16

    1  Page

  8. D17
    D17

    1  Page

  9. HK5
    HK5

    1  Page

  10. SW1
    SW1

    1  Page

  11. SC1
    SC1

    1  Page

  12. SO1
    SO1

    1  Page

  13. H9
    H9

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.