D16
1 / 1 PageView full catalog
D16
Product catalog summary
Specifications
The document outlines the specifications for GNROPE fittings, specifically focusing on chain dimensions and tolerances according to ISO 1704 standards. The dimensions for shackles are calculated by multiplying the common link size by specific factors related to the nominal chain diameter. These factors are: A = 1.3, B = 1.6, C = 1.4, D = 3.4, E = 2.8, F = 1.2, X = 4.0, and Y = 7.1 times the chain diameter.
The document outlines the specifications for GNROPE fittings, specifically focusing on chain dimensions and tolerances according to ISO 1704 standards. The dimensions for shackles are calculated by multiplying the common link size by specific factors related to the nominal chain diameter. These factors are: A = 1.3, B = 1.6, C = 1.4, D = 3.4, E = 2.8, F = 1.2, X = 4.0, and Y = 7.1 times the chain diameter.
Material and Finish
The fittings are made from forged steel types R3/R3S/R4/R4S and are finished with paint.
The fittings are made from forged steel types R3/R3S/R4/R4S and are finished with paint.
Standards and Certification
The fittings comply with ISO 1704 standards and are certified with a Certificate of Conformity and a 3.1 material certificate according to EN 10204.
The fittings comply with ISO 1704 standards and are certified with a Certificate of Conformity and a 3.1 material certificate according to EN 10204.
Temperature Range
The fittings are suitable for use in temperatures ranging from -40°C to +200°C and are polar rated.
The fittings are suitable for use in temperatures ranging from -40°C to +200°C and are polar rated.
Applications
These fittings can be used for mooring applications, and non-standard sizes or custom products are available upon request.
These fittings can be used for mooring applications, and non-standard sizes or custom products are available upon request.
See more
Catalog excerpts
TYPE D16 Material Finish Standards Temperature range Standard certification Forged steel R3/R3S/R4/R4S Painted ISO 1704 -40°C up to +200°C; Polar Rated Certificate of Conformity 3.1 material certificate EN 10204 Also to be used for mooring applications Non-standard sizes or custom products available on request Dimensions for shackles are calculated by multiplying the common link size by the factor shown in this drawing. GNROPE fittings Grofsmederij Nieuwkoop B.V. - The Netherlands www.gnweb.com, [email protected] Tel: +31(0) 172 579 303, Fax: +31(0) 172 571 073
Open the catalog to page 1All GN Rope Fittings catalogs and brochures
Related Searches
- Single block
- Anchor chain
- Ship chain
- Nautical swivel
- Nautical D-shackle
- Ship hook
- Single hook
- Snatch block
- Shackle for ships
- Sailboat sheave
- Joining shackle for ships
- Anchor chain connector
- Standard swivel
- Forged shackle for ships
- Hook with eye
- Straight shackle for ships
- Pelican hook
- Multi-function swivel
- Towing hook
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.