*mynauticexpo

TL11-R250

Product catalog summary

Specifications:
The TL11-R250 luminaire is designed for recessed installation in solid ceilings, particularly where an IP44 rating is required. It features a robust steel construction with a powder-coated white finish (RAL9016). The luminaire is available with a double prismatic (DP) or opalic (OP) plastic sheet diffuser for IP44, and a white grid (WG) plastic for IP20.

Design and Housing:
The luminaire is designed to meet maritime requirements, with a steel housing and frame secured by screws.

Electrical Components:
It includes an electronic ballast, with options for emergency battery backup. Magnetic ballast variants are available upon request. The lamp base is G13, supporting two T26 (T8) tubes of 18W or 36W.

Mounting and Installation:
The luminaire is installed in a ceiling cut-out using adjustable suspension brackets, which must be ordered separately. Cable entry is facilitated by two Ø20.5 mm holes with rubber grommets and knockouts at each end.

Dimensions and Variants:
The cut-out dimensions are 285 x 630 mm for 18W and 285 x 1240 mm for 36W. The product is available in several variants, each with specific part numbers and dimensions.

Accessories and Spare Parts:
Accessories such as suspension brackets (MNT-S TL11-R250) are available, with specific part numbers provided for ordering.

Environmental Conditions:
The luminaire is suitable for environments with a maximum ambient temperature of 45°C.

Catalog excerpts

TL11-R250 Luminaire for recessed installation IP 44 GL • Luminaire for recessing into solid ceilings • Robust steel luminaire • Ingress protection classification IP44/20 Application For recessed installation in solid ceilings where IP44-rating is required (DP and OP variants). Design According to maritime requirements. Housing Steel housing and steel frame fits to housing with screws. Finish Powder coated white RAL9016. Diffuser Double prismatic (DP) or Opalic (OP) plastic sheet in steel frame (IP44) or white grid (WG) plastic in frame (IP20). Reflector No reflector Mounting To be installed in ceiling cut out with adjustable suspension brackets. Suspension brackets (MNT-S TL11-R250) to be ordered separately. Cable entry Two holes Ø20.5 mm with rubber grommet on top, and two knock outs Ø20.5 mm in each end. Electric With electronic ballast and variants with emergency battery back up available. Variants with magnetic ballasts available on request. Termination One 5-way push in terminal block, 2 x 2.5 mm². Lamp base G13 Remarks Variants for adaption to panel ceiling available on request. Light source Two tubes T26 (T8), 18 or 36W. Cut out dimensions: 18W: 285 x 630 mm 36W: 285 x 1240 mm Ta=45°C Product IP Part-No Part-No B B1 L L1 Weight Weight Lamp Lamp TL11-R250 218 DP Class 44 HF TL11220001 HF-E3/S TL11220004 mm 305 mm 246 mm 670 mm 625 HF 4,1 HF+E 4,8 Code T26(T8) Base G13 TL11-R250 218 OP 44 TL11220002 TL11220005 305 246 670 625 4,4 5,1 T26(T8) G13 TL11-R250 218 WG 20 TL11220003 TL11220006 305 246 670 625 4,4 5,1 T26(T8) G13 TL11-R250 236 DP 44 TL11240001 TL11240004 305 246 1280 1238 6,9 7,7 T26(T8) G13 TL11-R250 236 OP 44 TL11240002 TL11240005 305 246 1280 1238 7,5 8,4 T26(T8) G13 TL11-R250 236 WG 20 TL11240003 TL11240006 305 246 1280 1238 7,8 8,7 T26(T8) G13 Accessories Part-No MNT E14 TL11 TL11210001 MNT B15 TL11 TL11210002 MNT-S TL11-R250 TL11210003 Suspension brackets (MNT-S TL11-R250) to be ordered separately 20

Open the catalog to page 1

GLOBAL MARINE & OFFSHORE LIGHTING SOLUTIONS Spare Parts B B1 90 L L1 Measurements are in mm www.glamox.com 21

Open the catalog to page 2

All GLAMOX ASA catalogs and brochures

MIX G2
2 Pages
TL50
3 Pages
FL60
4 Pages
SL2IR
3 Pages
Series 60
4 Pages

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list