MetPak Pro
4Pages

Weather Station Expandable, up to 10 Reference Quality Parameters Key Features Wind Speed & Direction  Temperature  Humidity  Barometric Pressure  Dew Point  2 Analogue Inputs  Pt100 Input  Digital Input (tipping bucket rain gauge)  MetPak Pro monitors the most essential weather parameters with the additional ability to connect up to four external measurement devices. The system combines a Gill WindSonic ultrasonic wind speed & direction sensor, a highly accurate barometric pressure sensor and Rotronic Hygroclip temperature/humidity probe. MetPak Pro contains additional inputs allowing for connection of a Pt100 temperature sensor, tipping bucket rain gauge (available from Gill) and two analogue sensors (water level sensor, pyranometer, pressure sensor, soil temperature sensor etc) and is supplied with selectable Gill ASCII, SDI-12 and Modbus outputs.. Base Station Options Available MetPak Pro can be configured with optional rain gauge and remote wind sensors. See page 3 for all wind sensor options. Included MetSet configuration software  MetView data logging/visualisation software  Mounting kit to adapt to poles or masts  Selectable ASCII, SDI-12 or Modbus Outputs  Allows an alternative method to connect the sensors to the MetPak in a convenient separate box. Mounting Pipe (not supplied) Ease of connection for remote heated wind sensors. Cables  Tipping bucket rain gauge

Technical Specifications WIND MEASUREMENT Parameters Units of measure Digital outputs RS232, RS422, RS485*, SDI-12 or Modbus (user selectable) * 2 wire point to point Baud rates ASCII, SDI-12 V 1.3, Modbus (RTU and ASCII) Data output Wind speed & direction or U & V (Vectors) m/s, knots, mph, kph, ft/min Wind Speed Wind Direction 0-5 V or 4-20mA loop or self powered 0-5 V or 4-20mA loop or self powered 12 bit resolution with an accuracy of ± 0.1% of reading +35µV offset 4 Wire Pt100 conforms to IEC 60751 Contact closure for tipping bucket rain gauge Capable of capturing events up to 10Hz...

Wind Sensor Options Base Station MetPak Pro is available as a Base Station which enables the system to be specified with a remote wind sensor if required. This sensor can be positioned away from the Base Station and a connection cable is provided. The Base Station has been tested in accordance with BSEN 60945 and is suitable for use in marine environments. This system, which includes inputs for a Pt100 temperature sensor, tipping bucket rain gauge (available from Gill) and two analogue sensors, can also be specified without a wind sensor if wind measurement data is not required. Optional...

Product Numbers Explained Product options may be model specific. Consult the Gill sales team for availability Product Code 1 = No Heating 2 = Standard Heating 3 = Enhanced Heating A = Base Station B = Integrated WindSonic 1 = MetPak 2 = MetPak Pro 3 = MetPak RG No Sensor Fitted WindSonic WindSonic M WindObserver 70 WindMaster WindMaster Pro Gill Instruments Special Additional Features 11 = Not Applicable 12 = ARG Rain Gauge 1723-0011 Iss 5 Copyright © Gill Instruments 2015 Gill Instruments Limited, Reg No. 2281574 Registered Office: The George Business Centre, Christchurch Road, New Milton,...