LIFTING YOUR WORLD

The Result Of The Experience INNOVATION WHICH DELIVERS VALUE WHICH OF THE BELOW CHARACTERISTICS WOULD YOU REQUIRE FOR A NEW MACHINE YOU ARE ABOUT TO BUY? Experienced Manufacturer Vanguard technology The highest Safety standards Extended Reliability Maximum Eficiency Proven Robustness Modern and compact design Minimum Maintenance User friendliness GH MAIN MILESTONES Own 8 manufacturing Facilities Selling to over 60 Countries and Regions Over 60 Years of performance in cranes industry Over 80 Years of history Over 125,000 global successful installations

More than 60 years of performance in lifting industry Remarkable yearly investment in R&D, focused on innovation Complying with European EN13001 & EN15011 (based on obsolete FEM1001 STD); Directive of Machines 2006/42/CE STD and GB Chinese STD Continuous improvement of any characteristic of our products by listening to our clients Extended speed range Cranes used for more than 20 years still performing well nowadays State of the art materials used for each component Elements tested for 100,000 hours under the worst conditions Latest technologies applied to improve the user experience in any industry...

The New Generation GH NEW HOIST SERIES: GHA12 (UP TO 3.2T), GHB11 (UP TO 6.3T), GHD13 (UP TO 12.5T) & GHE17 (UP TO 20T) • Totally modular, screwed mounting: easy maintenance. • Less moments of inertia. • Less weight, less power consumption. • Design in C decreasing side approaches in single girder versions. • Polymer rope guide: increased rope life span with less wear. • Improved materials used increasing hoist life span. • M5 (min) – M6 working groups in GHA12 and GHD17 versions. • Frequency inverters as standard on all movements (2 speeds in lifting optional). • Increased life of mechanical...

Configurations Covering Any Need Single girder hoist Foot mounted hoist Low headroom single girder hoist Standard double girder hoist (tubes) Double girder crab with end carriages SPEED INCREASED Single girder slewing hoist Frecuency Hz <25% Rated Load When load is < 25% of the nominal one, the fast speed increases by 60%

Characteristics SAFETY • Rope safety factor ≥ 5 in accordance with Directive of Machines 2006/42/CE STD. • Double limit switch on lifting. • Safe working period control. • Load swing control. • Operation and maintenance monitoring. • Load slip preventing feature. • Slack rope indication. • Protection against phase inversion or phase loss. • Modular design, allowing flexibility on falls interchange (4/1, 2/1, 4/2, etc.). • Motor overheating protection. • Overload limit device. • Reliable load clamping by safety latch. • Lightweight, no counterweight reducing stress on the structure. • Brake just...

* GHA12 only available in single girder low headroom version. * 1/1 and 2/2 falls only available in 2 speeds version. * Bigger HOL or lifting speeds available for each model under request. New Series Selection Table Hoist type

Big Capacity Hoists 16t-100t SERIES FOOT MOUNTED FEATURES t GEARBOX Robust and compact, situated on the exte- rior, allowing ease of access, gears in oil bath. The helical teeth in all the gears are cut with great precision, in cemented steel, assuring silent running, great reliabilty and long life. The drive from the motor to the gearbox is direct, avoiding coupling devices which have a tendancy to fail. t TRAVELLING GEAREDMOTORS Are specially designed for crane application. Low torque high inertia drives, provide gradual acceleration and smooth deceleration without excessive swing. t OVERLOAD...

Big Capacity Hoists Selection Table E * Bigger HOL or lifting speeds available for each model on request. Hoisting speed (4 m/min= 04) • Robustness as main characteristic. Wire rope falls (2/1; 4/1; 4/2; …) • Small crab approach to enlarge the working area. Lifting capacity (Eg.: 20t=20; 40t=40) Hoist type. Execution (F: Fixed hoist; N: Normal headroom; R: Low headroom; B: Double girder standard; T: Double girder with end girders) • Tailor made solutions on request: rotatory, turning, cradled, over-running, cantilever, etc. Hoist type. Size (F, G) Hoist type CODE FEM Group Reeving Pole-changing...

GH SERVICE OFFERING • Spare Parts. • Original Spare parts supply. • Customized spare parts supply. • Training. • Crane technical training. • Crane safety and operator training. • Technical support and consultation.

GH CRANES & COMPONENTS Tel.: +34 943 805 660 Fax: +34 943 888 721 Apdo. 27 - Bº Salbatore 20200 Beasain (Gipuzkoa) Spain [email protected] www.ghcranes.com