Easy installation The intercooler W/A assures the perfect functioning of the generator independently of the external ambient temperature, therefore the alternator and the engine will work at ideal temperature optimizing the performance and reliability of the gen-set. The generator may be installed in any room on the vessel without the need of ventilation blowers. Extremely compact and quiet, the generator is equipped with a double shock absorbing system to increase comfort: the first one absorbs vibrations from engine-alternator to the frame, the second one absorbs residual micro-vibrations from frame to vessel. Via Stazione 5 - 27030 Villanova d’Ardenghi (PV) - Italy Phone:+39-0382-5091 [email protected] www.genset.it Last update date 08/09/22 In line with our research and development policy, we reserve the right to update, modify or replace information and images without prior notice.

Control panel _ CBU EVO IL4 device controls and drives the genset. The large display and control pushbuttons allow easy use and monitoring: • Manual start • Voltage Vac • Frequency Hz • Hour meter • Genset battery voltage • Oil low pressure alarm • Engine preheating • Engine high temperature alarm • Alternator battery charger failure alarm • Protection alarm for frequency and rpm • Alarm history • Maintenance warnings • General alarm outlet • RUN outlet • Ready outlet • Programmable AUX outlet _ Emergency stop button _ Magneto-thermal protection Engine _Easy maintenance access to the feeding...

TECHNICAL DATA 50 Hz 60 Hz Synchronous, 4 poles, brushless, self-energized, with automatic voltage regulator (AVR) AC alternator Cooling Voltage regulation Voltage Frequency Amps Max. Power Continuous power Power Factor Insulating class Voltage stability Frequency stability The power is referred to a sea water temperature up to 31°, an atmosferic pressure of 100 KPa and a humidity percentage of 30%

CUSTOMIZATIONS Accessory 1. Remote control panel with 20 mt cable for Comap