PM/PL Series ► 2-Way Normally Open/Closed; 3-Way Directional ► MOPD: 15 PSIG to 30 PSIG (1.03 bar to 2.07 bar) ► As Low as 2.8 Watts; Based on Configuration These pinch valves offer 2-way Normally Open (NO) and Closed (NC), or 3-way Directional Control operation. While sharing similar configurations with the PM Series, the PL Series features larger tubing sizes. Their design ensures that only the inside of the tubing contacts the fluid. How To Order Use the Bold characters from the choices listed on the following page to construct a product code. 2-Way N.O. solenoid valve with a single path and silicone tube, optional mounting holes, and operating at 12 VDC. SOLENOID VALVES Part Prefix Table 1 2 Number of Paths 1 = Single Path 2 = Dual Path (Prefixes PLXX2 and PLXX4 only) 4 = 4 (Prefix PL222 only) 6 = 6 (Prefix PL222 only) 8 = 8 (Prefix PL222 only) 3 Tube Material S = Silicone C = C-Flex (Not available in Prefixes XXXX0, XXXX3, XXXX7) 4 Coil C203 = 12 VDC C204 = 24 VDC 5 Special Options Q = Quiet Operation F = Position Feedback Sensor H = Bottom Mounting Holes L = Low Power Consumption * Standard selection; will be used unless otherwise specified. Visit www.GemsSensors.com for most current information.

INERT ISOLATION VALVES Dimensions 075P2NC 2-way PM Series – 1/8˝ O.D. Tubing, Max. Normally Closed LEAD WIRES NOT TO SCALE WIRES ARE 26 AWG, MIN 24˝ (610 mm) LONG SET SCREW POSITION VARIABLE TO +0.25˝ (6.4 mm) Normally Closed SET SCREW POSITION VARIABLE TO +0.25˝ (6.4 mm) LEAD WIRES NOT TO SCALE WIRES ARE 26 AWG, MIN 24˝ (610 mm) LONG Ø1.0˝ (25.4 mm) LEAD WIRES NOT TO SCALE WIRES ARE 26 AWG, MIN 24˝ (610 mm) LONG LEAD WIRES NOT TO SCALE WIRES ARE 26 AWG, MIN 24˝ (610 mm) LONG 0.26˝ (6.6 mm) LEAD WIRES NOT TO SCALE WIRES ARE 26 AWG, MIN 24˝ (610 mm) LONG SET SCREW POSITION VARIABLE TO +0.25˝ (6.4...