*mynauticexpo

Catalogs
Gems Sensors
KV/KW Series Solenoid Valve

KV/KW Series Solenoid Valve

Product catalog summary

Overview: This document provides technical specifications and ordering information for Gems Sensors' solenoid valves, specifically the KV and KW series. These valves are designed for high flow rates with reduced component height and feature PTFE wetted parts for chemical compatibility.

Specifications:

Orifice Sizes: 0.092 to 0.156 inches
Maximum Operational Pressure Differential (MOPD): 15 PSI to 20 PSI
CV Range: 0.055 to 0.14
Internal Volume: 108 to 462 µl
Diaphragm and Body Material: PTFE (Polytetrafluoroethylene)

Product Configuration:

2-Way Normally Closed (N.C.) and 3-Way Directional Control
Body Port Configuration: Threaded side port with various thread options
Coil Voltage Options: 12 VDC, 24 VDC, 115 VAC, 220 VAC

Ordering Information: To order, use the bold characters from the provided choices to construct a product code. Example: KV205-T-1 S1-C203-H represents a 2-Way N.C. PTFE solenoid valve with specific configurations.

Dimensions: Detailed dimensions are provided for side port body configurations, including mounting hole specifications and lead wire details.

Contact Information: For custom designs or inquiries, contact Gems Sensors at 800-378-1600 or [email protected].

Catalog excerpts

KV/KW Series - 1.25" (31.75 mm) and 1.5" (38.1 mm) Solenoids ► 2-Way Normally Closed and 3-Way Directional Control ► MOPD: 15 PSI to 20 PSI ► CV Range: 0.092 to 0.156 ► PTFE Bodies and Diaphragms Our largest orifice sizes for the highest flow rates, with a reduced component height. They feature all-PTFE wetted parts for extreme chemical compatibility. How To Order Use the Bold characters from the choices listed on the following page to construct a product code. Body Ports* Body Material * Combination of Body Port Configuration and Port Thread; Manifold Mount (BM) does not use the Thread Size designator Example: KV205-T-1 S1-C203-H 2-Way N.C. PTFE solenoid valve, with a PTFE body, 1/4"-28 UNF flat bottom threaded side ports and mounting holes, operating at 12 VDC. * Maximum Operational Pressure Differential SOLENOID VALVES 2 Diaphragm Material T = PTFE Polytetrafluoroethylene 3 Body Material 1 = PTFE Polytetrafluoroethylene 4 Body Port Configuration S_ = Threaded side port Port Thread (Used in conjunction with Threaded Port Configurations) 1 = 1/4"-28 UNF flat bottom1 (Standard for KV) 2 = 10-321 3 = 5/16"-24 4 = 1/8" NPT (Standard for KW) 5 = M6 X 1,01 5 Coil C203 = 12 VDC C204 = 24 VDC C109 = 115 VAC C116 = 220 VAC * Standard selection; will be used unless otherwise specified. Standard selections are not referenced in final part number. Note 1. Not available with KW Series. Visit www.GemsSensors.com for most current information.

Open the catalog to page 1

INERT Isolation Valves Dimensions – Side Port Body 2-Way, Normally Closed (N.C.) KV Series KW Series LEAD WIRES (2X) #26AWG X 15˝ (381 mm) LONG PTFE COATED 4X 4-40 UN-2B MOUNTING HOLES ON Ø1.125˝ (28.57 mm) LEAD WIRES (2X) #26AWG X 15˝ (381 mm) LONG PTFE COATED 4X 4-40 UN-2B MOUNTING HOLES ON Ø1.125˝ (28.57 mm) 3-Way, Normally Closed (N.C.), Multi-Purpose, Directional Control KW Series LEAD WIRES (2X) #26AWG X 15˝ (381 mm) LONG PTFE COATED 4X 4-40 UNC-2B MOUNTING HOLES ON Ø1.125˝ (28.57 mm) PORTS, (3X) NC & NO EACH AT 90° OFF COMM SOLENOID VALVES Gems specializes in the design and manufacturing...

Open the catalog to page 2

KV/KW Series Solenoid Valve

KV/KW Series Solenoid Valve

Catalog excerpts

All Gems Sensors catalogs and brochures