KS Series - 3/8' (9.53 mm) Solenoids ► 2-Way, Normally Closed ► MOPD: 20 PSIG (1.38 bar) ► CV Range: 0.008 to 0.015 ► 1.8 Watts KS Series isolation valves are 2-way, Normally Closed (NC) valves featuring 0.38" (10 mm) solenoid shell diameters. The isolation valve design ensures that the only wetted parts are the valve diaphragm and the valve body. For exceptional chemical compatibility the KS Series utilizes PEEK or PPS bodies, with a choice of diaphragm materials to meet your specific needs. How To Order Use the Bold characters from the choices listed on the following page to construct a product code. Primary Prefix SOLENOID VALVES * Combination of Body Port Configuration and Port Thread; Manifold Mount (BM) does not use the Thread Size designator Example: KS201-P-4 S1-C203 Small 2-Way N.C. Perfluoroelastomer solenoid valve, with a Polyaryletheretherketone body and 1/4"-28 UNF flat bottom threaded side ports, operating at 12 VDC. * Maximum Operational Pressure Differential 2 Diaphragm Material T = PTFE Polytetrarfuoroethylene E = EPDM Ethylene Propylene Diene (M) P = FFKM Perfluoroelastomer 3 Body Material 3 = PPS Polyphenylene Sulfide 4 = PEEK Polyaryletheretherketone 4 Body Port Configuration BM = Manifold mount S_=Threaded side port B_=Threaded bottom port Port Thread (Used in conjunction with Threaded Port Configurations) 1 = 1/4"-28 UNF flat bottom (Standard) 2 = 10-32 3 = 5/16"-24 4 = 1/8" NPT 5 = M6 X 1,0 5 Coil C203 = 12 VDC C204 = 24 VDC Visit www.GemsSensors.com for most current information.

INERT Isolation Valves Dimensions – Threaded Port Body Side Port LEAD WIRES (2X) #28AWG X 24˝ (609.6 mm) LONG PTFE COATED LEAD WIRES (2X) #28AWG X 24˝ (609.6 mm) LONG PTFE COATED SET SCREW HEIGHT VARIABLE UP TO 1/4˝ (6 mm) Ø0.38˝ (10 mm) SET SCREW HEIGHT VARIABLE UP TO 1/4˝ (6 mm) Ø0.113˝ THRU, Ø0.218˝ X 0.062˝ DEEP MOUNTING HOLES TYP. 2 PLACES PORTS, (2X) AT 180° 0.11˝ THRU, 0.22˝ X 0.06˝ DEEP MOUNTING HOLES TYP. 2 PLACES Dimensions – Manifold Mount Body Manifold Preparation SET SCREW HEIGHT VARIABLE UP TO 1/4˝ (6 mm) 0.099˝ +/- 0.003˝ (2.51 mm +/- 0.08 mm) HOLE FOR LOCATING PIN Ø0.037 +/- 0.002...