B-Cryo Series  MOPD: 900 PSI  CV Range: 0.045 to 0.440  9 Watts The B-Cryo Series is a 2-way miniature Cryogenic valve designed and built for service down to -320°F (-196°C) in applications needing a CV between 0.045 and 0.440. Depending on your temperature requirements, the B-Cryo Series can be configured for liquid nitrogen (LN2), liquid carbon dioxide (LCO2), and other extreme temperature media. PTFE coated plungers, 316 Stainless Steel guide tubes and plunger springs, encapsulated coils, and PTFE or Rulon® seat seals produce a truly robust Cryogenic valve for applications requiring high cycle life and media temperature control. Typical Applications • Environmental Chambers • Food Processing • Laser Surgical Equipment • Semiconductor Manufacturing BODY PORTS 1/8-27 NPT (2) PLC’S BODY PORTS 1/8-27 NPT (2) PLC’S 0.44 0.80 1.26 CONDUIT (FILLED w/EPOXY) 1.26 CONDUIT (FILLED w/EPOXY) SOLENOID VALVES Use the Bold characters from the choices listed on the following page to construct a product code. Plunger Seal Material* Body Material* O-Ring Material* Body Port Configuration * Blank entry indicates a "Standard" selection (430F Stainless Steel, Rulon® and Variseal®, in this case). Example: B2062-LN2-LB-120/50/60VAC 2-Way N.C. Liquid Nitrogen Class-H Encapsulated Coil with lead-wires, conduit filled housing solenoid valve, with 430F stainless steel body, Rulon® plunger seal, Variseal® o-ring, 1/4-18 NPT female thread, operating at 120/50/60 Volt AC.

Part Prefix Table 1 1 Primary Prefix 2 Model -LN2 = Liquid Nitrogen model -LCO2 = Liquid Carbon Dioxide model 3 Body Material LN2 Only_ 4 Plunger Seal Material LN2 Only (blank) = Rulon®2 5 O-Ring Material LN2 Only (blank) = Variseal® (PTFE material with internal spring)2 TO = PTFE (consult factory) 6 Body Port Configuration LN2 Only (blank) = 1/8-27 NPT female thread2 LB = 1/4-18 NPT female thread LT = 1/8-28 BSPT female thread LU = 1/4-19 BSPT female thread BI = Bottom over-seat port, female thread (max. orifice = 1/8") BO = Bottom under-seat port, female thread RL = 90° porting - left hand RR...