AS Series  MOPD: 110 PSI (Plastic Body) or 150 PSI (Metal Body)  CV Range: 0.020 to 0.300  4.5 Watts (Plastic Body) or 7 Watts (Metal Body) The AS Series is a 2-way isolation valve, designed to control the flow of various aggressive liquids and gases with several body and diaphragm materials. With a modular design, the AS offers performance flexibility and the protection your media needs from the solenoid’s internal components. Numerous port configurations, voltage options, and coil constructions enable the AS Series to be a truly versatile miniature inert isolation valve, easily integrated into any complex or demanding system. Typical Applications • Analytical Instruments • Clinical Diagnostic Analyzers • Bio-Instrumentation Dimensions Threaded Port Body Manifold Mount Body ø1.03 MANIFOLD MATING DIMENSIONS Ø.125 SPANNER HOLES, (4) HOLES EQUALLY SPACED 0.17 BODY PORTS 1/8-27 NPT (2) PLC’S (OVERSEAT) 1 x Ø.104, ORIFICE ≤ 5/64˝ 2 x Ø.104, ORIFICE ≥ 3/32˝ Alternate 1/2" Conduit Housing Available on all body configurations 1.11 CONDUIT OPTION (1/2-14 NPSM) SOLENOID VALVES Use the Bold characters from the choices listed on the following page to construct a product code. Diaphragm Seal Material 5 Body Port Configuration Additional Options Example: AS2022-10-SB-NS-BD-110/50/60VAC-WM 2-Way N.C. (1/2˝ conduit housing) solenoid valve, with externally rectified coil (lead-wires only), 304 stainless steel body, nitrile (NSF/FDA) diaphragm seal, #10-32 female straight thread, operating at 110/50/60 Volt AC with rectified coil and mounting bracket. Notes 1. After the Primary Prefix, any "-Code" may be blank when standard (blank) selections are specified. 2. The Body Material option code, when specified, supercedes the standard body material indicated by the Primary Prefix.

* Other body orifice sizes may be available, consult factory. 2 Coil Construction (blank) = Tape-wrapped, Class-B, with 18" lead-wires* W_=Tape-wrapped coil, lead-wires, non-standard length (specify in inches) 1 = Encapsulated coil, Class-B, lead-wires 2 = Molded coil, Class-F, lead-wires 3 = Encapsulated coil, Class-H, lead-wires 4 = Encapsulated coil, Class-B, 3/16" spade terminals (1/4" spade optional) 10 = Externally rectified coil (lead-wires only) 11 = Tape-wrapped coil, Class-H, lead-wires HC2 = Encapsulated coil, Class-B, EN175301-803 Style C, Industrial, 9.4mm, 2+1 poles 3 Body Material...