3600 Series
4Pages

3600 Series Electronic Pressure Switch Exceptional Stability Through Sputtered Thin Film Technology No Moving Parts – Highly Resistant to Shock and Vibration Ideal for Off-Highway, Mobile, Medical Gas and Demanding Industrial Applications Long Cycle Life Fully Hermetically Sealed Built using our proven thin film sensing technology, 3600 Series solid-state pressure switches offer great accuracy in rough environments. These switches are ideal alternatives to electromechanical types in high cycle pressure applications, or when broad frequency response is needed. When very accurate set points or dead band requirements are needed, 3600 Series switches can be set to very tight specifications. They feature a modular design, with a host of pressure ports and electrical connections available. Switch set, reset and delays can be factory programmed per customer specification, and also modified in the field with a USB programming tool. Performance Long Term Drift Switch Point Resolution Switch Point Accuracy (25°C) Thermal Error Compensated Temperatures Operating Temperatures Fatigue Life Mechanical Configuration Pressure Port Wetted Parts Electrical Connection Enclosure Vibration Shock Approvals Weight Electrical Parameters Switch Rating Supply Voltage <0.2% FS/YR 0.1% FS ±0.5% ±1.8% FS max. -40°F to +221°F (-40°C to +105°C) -40°F to +221°F (-40°C to +105°C) Designed for more than 100 M cycles See under “Pressure Ports” secton 17-4 PH Stainless Steel See under “Electrical Connector” section IP67 (IP65 for electrical code B) BSEN 60068-2-6 (FC) BSEN 60068-2-64 (FH) BSEN 60068-2-27 (Ea) CE, PED, RoHS 1.23 to 1.9 ounce (35 to 53 grams) 700 mA Low Side Switch, 1000 mA High Side Switch 6 - 40 Volts (<8 mA without load) EMC Specifications Emissions Tests: EN61326-1:2006 and EN61326-2-3:2006 Test Standard Test EN55011:2009 + A1 Radiated Emissions Immunity Tests: EN61326-1:2006 and EN61326-2-3:2006 Test Standard Test EN61000-4-2:2009 Electrostatic Discharge EN61000-4-3:2006 + A2 Radiated Immunity EN61000-4-4:2012 Fast Burst Transients EN61000-4-6:2009 Conducted RF Immunity Visit www.GemsSensors.com for most current information.

SOLID-STATE Pressure Capability Pressure Range PSI (Bar) Proof Pressure (x Full Scale) Burst Pressure (x Full Scale) Fitting Code *NPT Threads 2-3 turns from finger tight (TFFT). Wrench tighten 2-3 turns. M12x1.5 HP Metal Washer Seal Fitting Code G1/4˝ A Integral Face Seal 11 G1/4"A Integral Face Seal PRESSURE SWITCHES General Notes: 1. The diameter of all cans is 19 mm (0.748˝) 2. Hex is 22 mm (0.886˝) Across Flats (A/F) for deep socket mounting 3. For other pressure connections, consult factory. Visit www.GemsSensors.com for most current information.

Electrical Connector Wiring Diagrams High Side Switch SWITCH OUTPUT SWITCH OUTPUT SWITCH OUTPUT POLARIZING WIDE CONTACT Digital Comms. Digital Comms. Switch Output Switch Output Switch Output Digital Comms. Switching Modes Active High SWITCH CLOSED GREEN = RISING PRESSURE RED = FALLING PRESSURE Active Window SWITCH CLOSED HYSTERESIS H1 = H2 SWITCH OPEN H1 SWITCH OPEN RESET 0% WINDOW SIZE SWITCH OPEN SWITCH CLOSED SWITCH CLOSED WINDOW SIZE SWITCH CLOSED SWITCH OPEN SWITCH OPEN RESET 0% Visit www.GemsSensors.com for most current information.

SOLID-STATE Mating Connectors Part Number MINI DIN Connector, Strain Relief (with drive screw & gasket) M12 Cord Set – 1 Meter (Red 1, Green 2, Blue 3, Yellow 4) M12 Cord Set – 3 Meters (Red 1, Green 2, Blue 3, Yellow 4) M12 Cord Set – 4 Meters (Red 1, Green 2, Blue 3, Yellow 4) M12 Cord Set – 5 Meters (Red 1, Green 2, Blue 3, Yellow 4) Recommended Mating Parts (Deutsch p/n: Housing Plug DT064S-P012; Wedge W4S-P012; Sockets 4X 0462-201-1631) Deutsch Cord Set 3´ Long (18 AWG PVC Cable – Black 1, Red 2, Green 3, White 4) How to Order Use the bold characters from the chart below to construct a...