22CS Series / 26CS Series -CSA Intrinsically Safe Industrial Pressure Transmitters ► Ranges from 7.5 to 6000psi (0.5 to 400 bar) and 0-300psi (0-25 bar) Absolute ► Voltage and 2 Wire 4-20mA output models ► All stainless steel wetted parts Certified by CSA for Canada and USA, the 22CS and 26CS Series intrinsically safe pressure transmitters are designed to withstand the rigors of the most difficult applications. An all-stainless steel construction, eliminates the need for seals and oil barriers that can deteriorate over time. Incorporating Gems CVD Sensors and ASIC technology the 22CS and 26CS Series offer long term reliability, excellent performance and long term stability ensuring long service life without routine maintenance. Available with a wide choice of pressure fittings and electrical connections rated from IP65 to fully immersible (IP68 200m WG). Specifications Input Pressure Range Vacuum to 6000 psi G (400 bar); 300 psi Absolute (0-25 bar) Proof Pressure 2 x Full Scale (FS) >20 x FS < 1000 psi (60 bar); >5 x FS < 6000 psi (400 bar) Fatigue Life Designed for more than 100 million FS cycles Performance Long Term Drift 0.2% FS/year (non-cumulative) Accuracy 0.25% FS typical (optional 0.15% FS) Thermal Error 1.5% FS typical (optional 1% FS) Compensated Temperatures -5°F to +180°F (-20°C to +80°C) Operating Temperatures -40°F to +260°F (-40°C to +125°C) for elec. codes A, B, C -5°F to +180°F (-20°C to +80°C) for elec. codes G -5°F to +125°F (-20°C to +50°c) for elec. codes F, M, 3 Zero Tolerance1% of span Span Tolerance 1% of span Mechanical Configuration Pressure PortSee ordering chart Wetted Parts17-4 PH Stainless Steel Electrical Connection See ordering chart IP65 for elec. codes A, B, C, 3 and G (with DIN connector fitted) IP67 for elec. code F IP68 for elec. codes M Vibration35g peak sinusoidal, 5 to 2000 Hz Acceleration 100g steady acceleration in any direction 0.032% FS/g for 15 psi (1 bar) range decreasing logarithmically to 0.0007% FS/g for 6000 psi (400 bar) range. Shock Withstands free fall to IEC 68-2-32 procedure 1 Approvals CSA Certified Class I, Division 1, Groups A, B, C, D Class II, Division 1, Groups E, F, G Class III When used in conjunction with a Zener safety barrier Weight Approx. 3.5 ounces (100 grams) (additional cable; 75 g/m) Series 22CS Series 26CS PRESSURE TRANSDUCERS Visit www.GemsSensors.com for most current information.

Sensors & Controls Individual Specifications Voltage Output units Output See ordering chart Supply Voltage (Vs) 1.5 VDC above FS output to 28 VDC Supply Voltage Sensitivity 0.01% FS/Volt_ Min. Load Resistance_(FS output / 2) Kohms_ Current Consumption_Approx 6 mA at 7.5V output_ Current Output units Output_4-20 mA (2 wire)_ Supply Voltage Sensitivity 0.01% FS/Volt_ Max. Loop Resistance (Vs-7) x 50 ohms Electromagnetic Capability Meets the requirement for CE marking of EN50081-2 for emissions and EN50082-2 for susceptibility. Test Data: • EN61000-4-2 Electrostatic Discharge. 8kV air discharge,...

Dimensions22CS Series Industrial DIN Connector Amplified Gauge Amplified Absolute 26CS Series 10-6 or 8-4 Mil-C Connector Large DIN 43650 Plug (mate supplied) Amplified Gauge Amplified Absolute Conduit Connector with Cable Conduit Connector with Flying Leads PRESSURE TRANSDUCERS Code F Visit www.GemsSensors.com for most current information.

Sensors & Controls How to Order Use the bold characters from the chart below to construct a product code Series - Pressure Datum- Performance Code Accuracy/Thermal A - .25%/1.5% B - .15%/1.0% Cable Length U - No Cable Fitted D - 3 feet (1 Meter) E - 9 feet (3 Meters) F - 16 feet (5 Meters) G - 32 feet (10 Meters) H - 50 feet (15 Meters) J - 65 feet (20 Meters) K - 82 feet (25 Meters) L - 98 feet (30 Meters) M - 132 feet (40 Meters) N - 164 feet (50 Meters) P - 246 feet (75 Meters) Q - 328 feet (100 Meters) R - 410 feet (125 Meters) S - 525 feet (160 Meters) Apparatus Protection C - CSA Approved...