PowerView 380
1 / 2Pages

Engine & Diagnostic Display The PowerView 300 Series features robust, multifunction displays for advanced monitoring of multiple electronic engines. It’s capable of monitoring multiple engines and machine parameters on an easyto-read 3.8-inch (97mm) QVGA monochrome LCD. The display is capable of handling sophisticated engine diagnostics as well as basic engine alarm/shutdown. Customize the PV380 display using the PowerVision Configuration Studio®, an intuitive tool designed to make customization simple. Using the software tool, users can tailor basic graphics, designate screen layout and define custom parameters. The PV380 is equipped with five tactile push buttons to quickly access a convenient menu. In addition, a backlit and heated graphic display with LEDs indicate alarm or shutdown status. Operating Voltage: 6-36 VDC Vibration and Shock: 7.86 random vibe (5-2000HZ) and ±50g shock in 3 axes Reversed Polarity: withstands reversed battery terminal polarity Operating Temperature: -40° to 185° F (-40° to 85° C) Storage Temperature: -40° to 185° F (-40° to 85° C) Communications: (1) CAN 2.0B; J1939 Protocol; Proprietary Messaging; (1) RS-485 serial EMC/EMI: 2004/108/EC and 2006/95/EC directives EN61000-6-4:2001 (emission) EN61000-6-2:2001 (immunity) EN-50121-3-2 and EN 12895 Connectors: Deutsch DT Series 6 and 12 pin Inputs: (4) resistive analog; (3) analog; 0-5V analog or digital; (1) frequency 2-10000Hz, 3.6-120VAC Outputs: (1) 500 mA; switched low-side (1) 5V supply (70mA); protected SAE J1113/2, 4, 11, 12, 21, 24, 26 and 41 Display: 3.8” (97mm) QVGA (320x240 pixels); monochrome transflective LCD with white LED backlight and heater Viewing Angle: ±50 horizontally; +45°/-60° vertically Keys: 5 tactile push buttons Alarms: Red and amber warning LEDs; capable of set point-triggered output for external piezo buzzer or shutdown relay In order to consistently bring you the highest quality, full-featured products, we reserve the right to change our specifications and designs at any time. MURPHY products and the Murphy logo are registered and/or common law trademarks of Enovation Controls, LLC. This document, including textual matter and illustrations, is copyright protected by Enovation Controls, LLC, with all rights reserved. (c) 2015 Enovation Controls, LLC. A copy of the warranty may be viewed or printed by going to http://fwmurp