Commercial Marine Display The HelmView HV450 is a 4-inch display specifically designed to meet the engine monitoring needs of the commercial marine industry. Its durable design and easy-to-use interface offer a complete view of your vessel’s engines. Monitor propulsion, auxiliary, transmission and genset engines all on one display. It is equipped with the ability to switch between day and night mode operations and even has a blackout option. There are multiple screens to choose from, and it features the ability to turn screens on/off to meet your specific marine application needs. The HV450 has the ability to be connected to a video camera for monitoring the engine room or other important areas of the vessel. It can utilize modern electronic engines and vessel monitoring using a SAE J1939 CAN network. This multifunctional, bonded screen allows you to monitor multiple engines, transmissions, fuel usage and more using only one device, thus greatly reducing operating costs. It has eight tactile push buttons that can easily be pressed with or without gloves. The HV450’s sunlight-viewable, full-color screen makes seeing lifelike gages, alarm warnings, service codes and video easy to view in virtually any condition. The HV450 is fully programmed to display Diagnostic Trouble Codes showing critical alarms and text explanations. Display Parameters The following are some of the parameters displayed by the HV450 in Imperial or Metric units (when applicable, consult engine or transmission manufacturer for SAE J1939 supported parameters). Engine RPM Engine Hours System Voltage % Engine Load at the Current RPM Coolant Temperature Oil Pressure Transmission Oil Temperature Transmission Oil Level Tank Levels Course Over Ground* Speed Over Ground* Longitude and Latitude* Real-Time Display* Instantaneous Fuel Usage Trip Fuel Navigational Bearing Active Service Codes Stored Service Codes (when supported) Video *NMEA GPS Antennae required In order to consistently bring you the highest quality, full-featured products, we reserve the right to change our specifications and designs at any time. MURPHY products and the Murphy logo are registered and/or common law trademarks of Enovation Controls, LLC. This document, including textual matter and illustrations, is copyright protected by Enovation Controls, LLC, with all rights reserved. (c) 2015 Enovation Controls, LLC. A copy of the warranty may be viewed or printed by going to www.fwmurphy.com/warran

Specifications Technical Display: Bonded 4.3” color transmissive TFT LCD Resolution: WQVGA, 480 x 272 pixels, 16-bit color Aspect Ratio: 16:9 Orientation: Landscape Backlighting: LED, 500-650 cd/m2 (30,000 hr lifetime) Microprocessor: Freescale i.MX357 32bit, 532Mhz QNX Realtime Operating System Flash Memory: 256 MB RAM: 128 Mbytes DDR2 SDRAM Operating Voltage: 6-32 VDC, protected against reverse polarity and load dump Power Consumption: 10W max. CAN: (2) CAN 2.0B; optional NMEA 2000 isolation Protocols: J1939, NMEA 2000 RS-485: (1) MODBUS Master/Slave Video Input: (2) NTSC/PAL input channels...