RD-20/RD-50

Product catalog summary

Overview: The FURUNO RD-20 and RD-50 are remote display units designed to present navigation data from onboard sensors. The RD-50 features an 8.4-inch color LCD with digital, analog, and graph display modes, while the RD-20 uses a red LED panel for alphanumeric data display. Both models support up to 10 displays connected via a daisy chain cable, with centralized control of display brilliance.

Specifications:

Display Types: RD-50 offers digital, analog, and graph modes; RD-20 provides alphanumeric display.
Connectivity: Up to 10 displays can be daisy-chained, with a single dimmer controller managing brightness.
Installation Options: Both models can be mounted on overhead consoles or desktops, with optional waterproof boxes for the RD-50.
Data Displayed: Includes ship speed, heading, course, rudder angle, depth, distance, water temperature, rate of turn, wind direction/speed, propeller pitch, engine/shaft revolutions, time, latitude/longitude, and destination.
Power Supply: RD-20/50 operates on DC 12-24 V.

Installation Recommendations:

Overhead console and desktop mounting options are available, with optional brackets for desktop installation.
The RD-50 can be installed overboard using a waterproof box.

Environmental Specifications:

Temperature Range: -15°C to +55°C for RD-20/50, -25°C to +55°C for remote and dimmer controllers.
Waterproofing: Front IP22, back IP20 for RD-20/50; front IP66, back IP22 for remote and dimmer controllers.
Vibration Compliance: IEC 60945-4 standard.

Additional Components:

Remote Controller (RD-501) and Dimmer Controller (RD-502) are available as options.
Waterproof Box (DS-605) for RD-50 and desktop mounting brackets are optional accessories.

Catalog excerpts

iMOTi DlSPLRV Models: RD-20/RD-50

Open the catalog to page 1

FURUNO RD-20/50 give a unified look for the sensor displays that carries an array of important navigation information from onboard sensors The RD-20/50 are the remote display units that display the Up to 10 displays can be connected with a daisy chain data from onboard sensors. The displays are switched by cable. The display brilliance of all units connected can be the remote controller. The RD-50, 8.4-inch color LCD, has 3 centrally controlled from 1 dimmer controller. display modes: digital, analog and graph. The RD-20 shows the data in alphanumerics on its red LED panel. High-contrast 8.4-inch...

Open the catalog to page 2

• Actual / Ordered rudder angle deg • Depth m, ft, fm • Rate of turn (ROT) deg/min • Wind Direction /Speed • Propeller pitch • Engine revolutions • Shaft revolutions • Time • Latitude and Longitude • Destination • 1/2/3-axes ship speed ■Analog display kn, km/h, m/s, mph • Shaft revolutions rpm % ‘Actual / Ordered rudder angle deg Graph display • Actual / Ordered rudder angle deg • Depth m, ft, fm • Water temperature • Rate of turn (ROT) • Wind Direction /Speed • Engine revolutions • Propeller pitch • Shaft revolutions

Open the catalog to page 3

Equipment List Power Supply Environment Standard Interconnection Diagram Display brilliance and sensor signal are transmitted through the daisy chain Display brilliance is transmitted through the daisy chain Waterproof Box (for rd-50) DS-605 Remote Display RD-20/50 Remote Display (Flush mount) RD-50 Sensor Remote Display (Flush mount) RD-20 0.8 kg 1.76 lb Remote Display (with an optional bracket) RD-20 1.3 kg 2.87 lb Remote Controller Dimmer Controller RD-501 RD-502 0.53 kg 1.17 lb All brand and product names are registered trademarks, trademarks or service marks of their respective holders....

Open the catalog to page 4