Ginkgo Product Catalog
Ginkgo Product Catalog
The Ginkgo Waste Shredder is an Italian-made electro-mechanical device designed to manage waste efficiently and sustainably. It features the patented Ecotrix shredding system, which reduces waste volume by 95% using centrifugal force.
Specifications
- Materials: Shreddable waste including bottles (0.5 to 2 liters), drink cans (15 to 50 cl), and other containers up to H 140 x W 350 x D 140 mm.
- Input Capacities: Available in 6-liter and 20-liter models.
- Output Capacities: Collection bins range from 10 liters to 120 liters.
- Power Supply: 230 VAC 50Hz with equipment power of 1.1 KW for 6-liter and 1.5 KW for 20-liter models.
- Cycle Time: 40 seconds for 6-liter and 60 seconds for 20-liter models.
- Noise Level: 50 dB, peaking at 70 dB for 5 seconds.
- Safety Features: Electric locks on input and output doors.
Features
- Volume Reduction: Achieves a 95% reduction, transforming 20 bags of 110 liters each into just one bag.
- Cost and CO2 Reduction: Reduces waste transport costs by up to 30% and CO2 emissions by 80% annually.
- EcoCredits: Users earn EcoCredits with each use, which can be redeemed for purchases.
- Certified Climate Impact: The system is certified by Impact Forecast for its positive climate impact.
Installation Locations
The shredder is suitable for various environments including homes, yachts, HORECA events, offices, and industries.
Contact Information
Frieco società bene7t s.r.l., Viale Coni Zugna 5/A, 20144 Milano, Italy. Email: [email protected], Website: www.frieco.it
Catalog excerpts
WASTE SHREDDER GINKGO Italian product built in ITALY
Open the catalog to page 1
MATERIALS shreddable Ginkgo waste shredders are electro-mechanical devices for managing waste more e)ciently and sustainably. Inside there is the exclusive patented Ecotrix shredding system that allows to reduce the volume of all waste by 95%. MAXIMUM WASTE INSERTION DIMENSIONS - Bottles: from 0.5 to 2lt - Other containers: H 140 x W 350 x D 140 mm MAXIMUM WASTE INSERTION DIMENSIONS - Bottles: from 0.5 to 2lt - Other containers: H 140 x W 350 x D 140 mm MAXIMUM WASTE INSERTION DIMENSIONS - Drink cans: 15, 25, 33, 50 cl MAXIMUM WASTE INSERTION DIMENSIONS - H 140 x W350 x D 140 mm (including cardboard)...
Open the catalog to page 2
Ginkgo Models SHREDDING UNIT – INPUT It is the heart of Ecotrix technology, where the waste is inserted and then shredding starts. The maximum input capacities are of two types: 6lt and 20lt. 20 LT: Input mouth max 20 litres per cycle. 6 LT: Input mouth max 6 litres per cycle. COLLECTION UNIT – OUTPUT It is the support of the shredding unit (output) which also acts as a container for the separate collection of shredded material. It therefore identi2es the maximum capacity of the material collection bin which starts from 10lt and reaches 120lt. OPTIONAL ON REQUEST. ENVELOPE HOLDER Galvanized or...
Open the catalog to page 3
TECHNICAL features INPUT DIMENSIONS [mm] OUTPUT [Lt] TOTAL DIMENSIONS [mm] REDUCTION TECHNOLOGY USER INTERFACE SAFETY DEVICES CYCLE TIME ELECTRICAL SOCKET TYPE EQUIPMENT POWER POWER SUPPLY VOLUME REDUCTION OUTPUT [Lt] TOTAL DIMENSIONS [mm] Power button, start + led Ecotrix Patented Shredding 95% - 20:1 ratio 50 dB (70 dB peak for 5 sec) Schuko n.1 Electric lock blocking Input Door n.1 Electric lock blocking Output Door RAL 7024 OUTPUT: 120lt Note: Product photos are for illustrative purposes only. This does not change the fact that the basic features will be the same.
Open the catalog to page 4
HOW IT WORKS step by step 1) OPEN THE DOOR
Open the catalog to page 5
PATENTED SHREDDING: The patented cutting system uses centrifugal force to shred all waste, reducing the waste into small 1 cm fragments in just a few seconds. 95% VOLUMETRIC REDUCTION: All waste is reduced to small 1 cm fragments; This means that if for example we “produce” 20 bags of 110 lt/each, with the use of the Ecotrix system it becomes only 1 of 110 lt; See real example below. COST REDUCTION: Reducing the volume of waste at the source means reducing the amount of transport. This directly affects management costs, which can be reduced by up to 30%. If your municipality applies the point-based...
Open the catalog to page 6
Installation locations FRONT END ADDITIONAL KIT Touch screen User recognition Thermal printer Material recognition
Open the catalog to page 7
INFO contacts Frieco società bene7t s.r.l. Registered o;ce: Viale Coni Zugna 5/A 20144 MILANO (MI) ITALY Operational headquarters: Via Parisetto, 26 10048 Vinovo (TO) ITALY Email Contacts: [email protected] Website: www.frieco.it
Open the catalog to page 8