*mynauticexpo

Pantograph Hinge

Product catalog summary

Specifications:
The document outlines the specifications for Freeman Marine's Pantograph Premium Duty Hinges. These hinges are designed for rough opening sizes ranging from 24 to 46.5 inches (610 to 1190 mm). The pantograph arm lengths vary from 14 to 23 inches (360 to 590 mm), depending on the size of the opening.

Interior Space Requirements:
The interior space required for installation ranges from 14.8 to 17.6 inches (380 to 450 mm), measured from the outermost edge of the hinge mount to the innermost point of the hinge.

Maximum Swing and Fully Open Dimensions:
The maximum swing of the hinge is between 14.3 and 23.7 inches (370 to 610 mm), while the fully open dimension is consistent at approximately 10.1 to 10.9 inches (260 to 280 mm).

Hinge Distance into Opening:
The hinge distance into the opening ranges from 7 to 8 inches (180 to 210 mm), measured from the rough opening to the innermost point of the arm in a fully open position.

Load Capacity:
Each single hinge can handle up to 300 lbs (136 kgs), making them suitable for heavy-duty applications.

Additional Information:
Specially sized and featured pantograph hinges are available upon request. For custom requirements, contact the Freeman Marine Sales Department.

Catalog excerpts

HINGE - Pantograph Premium Duty Interior Space Required (A) PARTIALLY OPEN Fully Open (C) Hinge Distance into Opening PANTOGRAPH HINGE - Premium Duty Illustrations represent a typical standard configuration, basic pantograph hinge. Specially sized and/or featured pantograph hinges are available by special quote. Contact Freeman Marine Sales Department with your requirements. For Rough Opening Size (minimum-to-maximum range) Pantograph Arm Length (measured at pivot point C/L of arms) Interior Space Required (outer most edge of hinge mount-to-inner most point of hinge) Maximum Swing (outward, measured wall-to-face of standard panel) Fully Open (face of door-to-outer face of wall) Hinge Distance into Opening (rough opening-to-inner most point of arm in fully open position) © ALL RIGHTS RESERVED 2008 FREEMAN MARINE EQUIPMENT, INC. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE www.freemanmarine.com 28336 Hunter Creek Rd., Gold Beach, Oregon 97444 USA

Open the catalog to page 1

PANTOGRAPH HINGE PREMIUM – SINGLE HINGE Single Hinge Handles Up To 300 lbs. – 136 kgs.

Open the catalog to page 5

PANTOGRAPH HINGE PREMIUM – SINGLE HINGE Single Hinge Handles Up To 300 lbs. – 136 kgs.

Open the catalog to page 6

All Freeman Marine Equipment catalogs and brochures

Archived catalogs

DOOR – Sliding, Dual-Axis, Single Leaf & Bi-Parting Model 1720 & 1726
2 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list