Model 3430
20Pages

{{requestButtons}}

Catalog excerpts

Model 3430 - 1

PREMIUM DUTY, QUICK-ACTING HATCH DESIGN FEATURES • Custom Shapes and Sizes • Camber and Sheer to Match Decks (avail) • .160”~.250” Thick Aluminum Panel Skins • Patented Chain Drive Quick-acting Dogging • Welded Frame and Skin Construction • Knife-edge Sealing Method • Wide Gasket for Aggressive, Tight Sealing • Flush with Deck or Raised Coamings FREEMAN MARINE Quick-Acting, custom fabricated cockpit hatches offer a wide range of options to meet customer specifications. Patented chain-drive dogging allows multiple dogs (up to 8 per circuit) to be actuated by a single bi-square or interior handle. Dogs feature roller bearing cam followers for easy closure. External bi-squares may be ordered for exterior dogging. Custom shapes and sizes may be ordered with either flush or proud coamings. Camber and sheer requirements to match deck profiles are routinely crafted. Hatches can be specified with either surface or concealed hinges. Panels and coamings can be specified with custom alignment for teak overlaying by installation yard or builder. HATCH – Single Leaf, Premium Duty, Quick-Acting • Bolt-in and Weld-in Coamings • Surface or Concealed Hinges • Gas Spring Assist for Easy Lift and Closure • Cast, Precision Machined Handles, wide selection of styles and finishes • Custom Drain Locations (avail) • Teak Overlay Prep • Internal Panel Stiffeners • Yacht-quality Painted Finish • External Bi-square Opening • Stainless Steel Shafts and Fasteners • Cast Dogs with Roller Bearing Cam Followers • Glass Filled Striker Wedges • Solid Insulation Standard (opt materials) Shown in the open position, polished hardware and gas springs make this hatch an attractive addition to the aft cockpit. This 3430 custom deck hatch features stainless flush deck hinges and bi-square matched to teak deck height for a smooth, attractive deck appearance. 28336 Hunter Creek Rd., Gold Beach, Oregon 97444 USA Member of Advanced Marine Technologies Yoke hinges (shown with optional polished finish) are utilized on this cambered sailing yacht hatch. When closed, only external bi-squares and optional lifting ring hardware are visible on deck.

Open the catalog to page 1
Model 3430 - 2

Polished dog with roller bearing cam follower Dog handle, Lever with return and lock button, Inspection plate for chain drive Surface hinges, Lever handle, Forepeak access, Open Crew access, Raised Stainless coaming, Large glass inset Installed in fiberglass Sport deck, Hinged short side, Closed Bi-square, Raised for teak overlay, D-handle lift ring, Bi-square, Both raised for teak overlay Grab handle Round hatch, Yoke hinge Custom shaped and cambered, Hardware raised for teak overlay Custom shaped and cambered, Open Drain side, 3000 Series hatch Glass inset panel, Stainless raised coaming,...

Open the catalog to page 2
Model 3430 - 3

HATCH – Single Leaf, Premium Duty, Quick-Acting Yoke hinges, Gas spring Mounted on Hinges for teak kickup, Skirted coaming for thick overlay Deep gutter, Gas springs on coaming, Closed Deep gutter, Gas spring in gutter Stainless Surface hinge, Raised mounting for teak overlay Large yoke hinges, Polished, Stainless coaming Steel knife-edge gutter, Gas spring mount, Flange surface hinges Deep gutter, Gas springs on coaming, Full panel, Dogged lever handle Deep gutter, Gas springs on coaming, Small lens inset, Low profile lever handle Deep gutter, Yoke hinges, Gas springs on coaming (note 2400...

Open the catalog to page 3
Model 3430 - 4

layout model 3430 kVWWV- Hinges - specified separately Gas springs - specified separately HINGE and DRAIN LOCATION Scale Note: Hatch shown with 0641-1014 coaming © ALL RIGHTS RESERVED 2010 freeman marine equipment, INC. specifications subject to change without notice MARINE EQUIPMENT Member of Advanced Marine Technologies www.freemanmarine.com iso 9001:2008 28336 Hunter Creek Rd., Gold Beach, Oregon 97444 USA 541-247-7078 • 541-247-2114 Fax • 1-888-FREEMAN

Open the catalog to page 4
Model 3430 - 5

PANEL - Fabricated, Premium Duty Panen panel Sealing Performance © ALL RIGHTS RESERVED 2010 FREEMAN MARINE EQUIPMENT, INC. SPECIFICATIONS SuBJECT TO CHANGE WITHOuT NOTICE MARINE EQUIPMENT Member of Advanced Marine Technologies www.freemanmarine.com iso 9001:2008 28336 Hunter Creek Rd., Gold Beach, Oregon 97444 USA 541-247-7078 • 541-247-2114 Fax • 1-888-FREEMAN

Open the catalog to page 5
Model 3430 - 6

Aluminum - Deep Gutter Steel - Deep Gutter 0641-1034 Stainless Steel - Deep Gutter 0641-1025 © ALL RIGHTS RESERvED 2010 freeman marine equipment, INC. specifications subject to change without notice MARINE EQUIPMENT Member of Advanced Marine Technologies Degree of watertightness depends on panel and coaming construction, number of dogs, proper installation and sealing adjustment. Closures are individually defined, specified and fabricated for each application. www.freemanmarine.com iso 9001:2008 28336 Hunter Creek Rd., Gold Beach, Oregon 97444 USA 541-247-7078 • 541-247-2114 Fax •...

Open the catalog to page 6
Model 3430 - 7

Commercial panel hatch, quick-acting design features • Welded Frame and Welded Exterior Skin Construction Rugged construction featuring aluminum panel skins (.160” up to .250”), internal reinforcements, choice of welded or bonded exterior skin and a screw-fastened interior skin, the 3440-series hatch provides the reliable service expected in a technical and machinery space Quick-Acting hatch. • Interior Skin Attached with Screws • Knife-edge Sealing Method • Flush with Deck or Raised Coamings • Bolt-in and Weld-in Coamings • Coamings of Aluminum, Mild Steel or Stainless Steel For...

Open the catalog to page 7
Model 3430 - 8

3440 Recessed Surface Hinges 3440 (2x with removable mullion), Cambered, Exterior, Open 3440 with Surface Hinges 3440 (2x with removable mullion), Cambered 3440 (2x with removable mullion), Cambered, Closed 3440 Steel Coaming, Shape 3440 Lift Out, Steel Coaming 3440 with Surface Hinges 28336 Hunter Creek Rd., Gold Beach, Oregon 97444 USA Member of Advanced Marine Technologies HATCH – Single Leaf, Commercial, Aluminum Panel, Quick-Acting Model 34

Open the catalog to page 8

All Freeman Marine Equipment catalogs and brochures

  1. WINDOWS

    3 Pages

  2. series 4000

    2 Pages

  3. Model 3450

    2 Pages

  4. Model 3440

    2 Pages

  5. MODEL 3150

    2 Pages

  6. Model 3140

    2 Pages

  7. Model 3130

    2 Pages

  8. Model 1620

    2 Pages

  9. Model 1610

    2 Pages

  10. model 1520

    2 Pages

  11. model 1510

    2 Pages

  12. model 1140

    2 Pages

  13. Model 1130

    2 Pages

  14. HATCHES

    8 Pages

Archived catalogs