*mynauticexpo

Three screws pumps

Product catalog summary

Overview: The document provides technical specifications and details for various models of three screws pumps distributed by Fluid Global Solutions. These pumps are designed for handling a range of fluids and are suitable for various industrial applications.

Specifications:

Models: Includes models 25, 32, 40, 28, 33, 38, 47, 55, 63, 72, and others.
Flow Rate: Ranges from 3 L/min to 290 L/min depending on the model and operating conditions.
Shaft Speed: Operates between 150 to 6,500 rpm.
Pressure: Outlet pressure up to 80 bar, with specific models supporting up to 300 bar peak pressure.
Fluids Supported: Mineral oils, synthetic fluids, emulsions, bunker oils, furnace oils, ecological fluids, and various fuel oils.
Viscosity: Supports fluids with viscosity from 2 cSt to 100,000 cSt.
Temperature Range: Environment temperature from -50°C to +60°C, fluid temperature from -50°C to +300°C.
Materials: Pump bodies made from cast iron, extruded aluminum alloy, and carbon steel.

Features:

Seals: Options include NBR, FKM, EPDM, mechanical seals, and magnetic couplings.
Acoustic Emissions: Noise levels range from 50 to 68 db(A) depending on the model and operating speed.
Installation: Pumps can be installed externally or submersed, with various flange and motor connection options.
Filtration: Recommended filtration levels vary, with some models requiring filtration down to 10 μm for heavy-duty operations.

Additional Solutions: The document mentions the availability of magnetic coupling and splined shaft solutions for specific applications.

Contact Information: Fluid Global Solutions provides contact details for sales and administration, including phone numbers, email addresses, and physical office location in Italy.

Catalog excerpts

PUMPS AND SPARE PARTS FLUID GLOBAL SOLUTIONS  Three Screws Pump

Open the catalog to page 1

MASTER DISTRIBUTOR THREE SCREWS PUMP Technical data sheet MAGNETIC COUPLING 25 - 32 - 40 No axial or radial loads From 12 to 75 L/min (at 1.450 rpm) Clockwise (from shaft end) From 500 to 3.600 rpm Up to 20 bar continuous, up to 40 bar intermittent Inlet pressure Min. 0.7 bar, max. 1.5 bar (for higher pressures please contact SETTIMA) Fluids Mineral oils, synthetic fluid or emulsions, bunker oils, furnace oils, ecologic fluids, fuel oils (HFO, MDO, LFO, MGO), marine distillate and residual fuels Viscosity Down to 2 cSt API Seals Lip seal: NBR, Viton, EPDM, other on request Mechanical seal Lip...

Open the catalog to page 2

Models Motor connection (male shaft type) Motor connection (AC Type pumps) Ports Flow Shaft rotation NEMA standard (for direct coupling with motor) (for direct coupling with motor) THREE SCREWS PUMP Technical data sheet BSPP – SAE 3000 NPT From 4 to 1.220 L/min From 1 to 1.800 GPM (at 1.750 rpm) Clockwise (from shaft end), suitable also for counter clockwise rotation Shaft speed From 500 to 3.600 rpm (contact Settima for speed below 1000 and over 1.800) Outlet pressure Up to 80 bar Inlet pressure Min. -0.7 bar max. 3 bar Fluids Mineral oils, synthetic fluid or emulsions, bunker oils, furnace...

Open the catalog to page 3

PUMPS AND SPARE PARTS Phone: +39 0187 1953245 Fax: +39 0187 1953246 Email: sales@ﬂuidglobalsolutions.com Administration: [email protected] PEC: ﬂ[email protected] Registered ofﬁce: Via XXV Aprile, C3 19021 Arcola – LA SPEZIA - ITALY SHIPSERV: Trade ID: 220420

Open the catalog to page 4

All Fluid Global Solutions Srl catalogs and brochures

Centrifugal pumps
4 Pages
Spare parts
4 Pages
Pumps
4 Pages
BROCHURE
8 Pages