Optical Gas Imaging Cameras For Continuous Gas Leak Detection Optical gas imaging cameras from FLIR can visualize and pinpoint gas leaks that are invisible to the naked eye. With an optical gas imaging camera it is easy to continuously scan installations that are in remote areas or in zones that are difficult to access. Continuous monitoring means that you will immediately see when a dangerous or costly gas leak appears so that immediate action can be taken. Optical gas imaging (OGI) cameras are widely used in industrial settings, such as oil refineries, natural gas processing plants, offshore platforms, chemical/ petrochemical complexes, and biogas and power generation plants. OGI cameras like the FLIR G300 a can detect harmful VOC’s (volatile organic compounds) that can seriously harm the environment. FLIR G300 a optical gas imaging camera can be easily integrated in housings with application specific requirements. COOLED DETECTOR MAKES THE SMALLEST TEMPERATURE DIFFERENCES VISIBLE FLIR G300 a contains a cooled Indium Antimonide (InSb) detector that produces thermal images of 320 x 240 pixels. With its low F-number and high sensitivity, G300 a detects the smallest of leaks. The high sensitivity mode further enhances the detection level of the camera so that the smallest gas leaks can be detected. All models are easy to control from a safe distance. They can be fully controlled over Ethernet. They can easily be integrated in a TCP/ IP network. Captured gas leak from production site. AVAILABLE LENSES The FLIR G300 a is available with a 23 mm (FOV: 24° × 18°) or 38 mm (14.5 x10.8) lens. Longer lenses give you a narrower field of view so that you can detect gas leaks from further away. FLIR G300 A DETECTS THE FOLLOWING GASES: Benzene, Ethanol, Ethylbenzene,Heptane, Hexane, Isoprene, Methanol, MEK, MIBK, Octane, Pentane, 1-Pentene, Toluene, m-xylene, Butane, Methane, Propane, Ethylene and Propylene.

Technical specifications FLIR G300 a Imaging & Optical Data Data communication interfaces Thermal sensitivity/NETD Minimum focus distance F-number Automatic using FLIR SDK, or manual 1–8× continuous, digital zoom Digital image enhancement Noise reduction filter, High Sensitivity Mode (HSM) Detector data Detector type Focal Plane Array (FPA), cooled InSb Spectral range Image presentation Automatic image adjustment Continuous/manual; linear or histogram based Manual image adjustment Image presentation modes Image modes IR-image, High Sensitivity Mode (HSM) Electronics and data rate Full frame rate...