*mynauticexpo

FLIR A6604

Product catalog summary

Overview: The FLIR A6604 is a thermal imaging camera designed for continuous gas leak detection. It is particularly useful in industrial settings such as oil refineries, natural gas processing plants, and chemical industries. The camera can detect harmful greenhouse gases, providing immediate alerts for dangerous or costly leaks.

Key Features:

Cooled Detector: The camera features a cooled Indium Antimonide (InSb) detector with a resolution of 640 x 512 pixels, allowing for the detection of small temperature differences and providing a wide field of view.
High Sensitivity Mode: Enhances detection capabilities to identify even the smallest gas leaks.
Remote Control: The camera can be controlled over Ethernet and integrated into a TCP/IP network, supporting GigE Vision and GenICam standards.
Gas Detection: Capable of detecting gases such as Benzene, Ethanol, Methane, and Propane, among others.

Technical Specifications:

Imaging & Optical Data: IR resolution of 640 x 512 pixels, thermal sensitivity of <20 mK at +30°C, and various field of view options depending on the lens used.
Detector Data: Focal Plane Array (FPA), cooled InSb, with a spectral range of 3.2–3.4 μm.
Image Presentation: Offers automatic and manual image adjustments with modes including IR-image and High Sensitivity Mode.
Electronics and Data Rate: Full frame rate of 60 Hz, with options for higher rates at reduced window sizes.
Temperature Ranges: Operates from –20°C to +350°C, with optional ranges up to 2,000°C.
Ethernet: Supports 1 Gbps Ethernet with TCP/IP communication, video streaming, and image streaming capabilities.
Environmental Data: Operating temperature range from –40°C to +50°C, with storage capabilities from –55°C to +68°C.
Physical Data: Weighs 2.3 kg and has dimensions of 196 x 102 x 102 mm, excluding the lens.

Compliance and Standards: The camera complies with various directives and standards, including low voltage and EMC directives, and is encapsulated to IP 50 standards.

Contact Information: FLIR Systems has offices in Belgium, USA, Sweden, Canada, and the UK, providing global support and sales.

Catalog excerpts

Thermal Imaging Camera for Continuous Gas Leak Detection Optical gas imaging cameras from FLIR can visualize and pinpoint gas leaks. With an optical gas imaging camera it is easy to continuously scan installations that are in remote areas or in zones that are difficult to access. Continuous monitoring means that you will immediately see when a dangerous or costly gas leak appears so that immediate action can be taken. Optical gas imaging (OGI) cameras are widely used in industrial settings such as oil refineries, natural gas processing plants, offshore platforms, chemical/ petrochemical industries, and biogas and power generation plants. OGI cameras like the FLIR A6604 can detect harmful greenhouse gases that can seriously harm the environment. COOLED DETECTOR MAKES THE SMALLEST TEMPERATURE DIFFERENCES VISIBLE FLIR A6604 contains a cooled Indium Antimonide (InSb) detector that produces thermal images of 640 x 512 pixels. More pixels give you a wider field of view so that you can monitor larger installations. It also offers an ultracrisp image. The high sensitivity mode further enhances the detection level of the camera so that the smallest gas leaks can be detected. FLIR A6604 is easy to control from a safe distance. It can be fully controlled over Ethernet and easily integrated in a TCP/ IP network. The FLIR A6604 is GigE Vision and GenICam compatible. Captured gas leak. FLIR A6604 DETECTS THE FOLLOWING GASES: Benzene, Ethanol, Ethylbenzene,Heptane, Hexane, Isoprene, Methanol, MEK, MIBK, Octane, Pentane, 1-Pentene, Toluene, Xylene, Butane, Ethane, Methane, Propane, Ethylene and Propylene.

Open the catalog to page 1

Technical specifications FLIR A6604 Imaging & Optical Data Thermal sensitivity/NETD Field of view (FOV) v Environmental data <20 mK @ +30°C (+86°F) 21.4° x 17.5° with 25 mm lens, 11.0° x 8.9° with 50 mm lens, 5.5° x 4.4° with 100 mm lens Minimum focus distance Digital image enhancement High Sensitivity mode Detector data Operating temperature range Storage temperature range Humidity (operating and storage) Directives EMC Encapsulation Bump Vibration Detector type Focal Plane Array (FPA), cooled InSb Spectral range Image presentation Automatic image adjustment Manual image adjustment Level/span...

Open the catalog to page 2

All FLIR Systems, Inc. catalogs and brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list