Multi-Sensor Thermal Imaging Camera for Condition Monitoring FLIR A310 pt thermal cameras can be installed almost anywhere to monitor the condition of your critical equipment and other valuable assets. Designed to help safeguard your plant and measure temperature differences, they allow you to see problems before they become costly failures -- preventing downtime and enhancing worker safety. FLIR A310 pt is ideal for various applications that require temperature measurement capabilities including: substation, transformer, waste bunker, and coal pile monitoring. The FLIR A310 pt pan/tilt has all the necessary features and functions to build single- or multi-camera solutions. The FLIR A310 pt can pan +/- 360º continuous and tilt +/- 45º. It is ideal to cover large areas. Typical application examples are coal pile, waste bunker and substation monitoring, utilizing standard Ethernet hardware and software protocols. The FLIR A310 pt is a multi-sensor and includes a lowlight 36x zoom color CCD camera. EXCELLENT IMAGE QUALITY FLIR A310 pt contains an uncooled Vanadium Oxide (VOx) microbolometer detector. It produces crisp thermal images of 320 x 240 pixels and makes temperature differences as small as 50 mK clearly visible. It comes with a built-in 25 degree lens with motorized focus. MPEG-4 streamed video output over Ethernet to show live images on a PC, and 640 x 480 with overlay up to 30 Hz. Composite video outputs, PAL and NTSC compatible are available. Both cameras can be controlled remotely over the Web and TCP/IP protocol. BUILT-IN ANALYSIS AND ALARM FUNCTIONS Continuous monitoring of a high-voltage installation. FLIR A310 pt comes standard with built-in analysis functions like spot, area measurement and temperature difference. Alarms can be set to go off as function of analysis. DESIGNED FOR USE IN HARSH ENVIRONMENTS A310 pt is an extremely rugged system that meets IP66 requirements, protecting the camera from dust and water. FLIR SENSORS MANAGER Each FLIR A310 pt comes with a single sensor copy of FLIR Sensors Manager. This intuitive software allows users to manage and control the cameras in a TCP/IP network. Thermal image of a substation showing a transformer with excessive temperature.

Imaging Specifications Imaging and optical data Technical specification (pan & tilt) IR resolution Thermal sensitivity/NETD Minimum focus distance Focal length Spatial resolution (IFOV) Lens identification F-number Image frequency Focus Zoom Detector data Detector type Spectral range Detector pitch Detector time constant Focal Plane Array (FPA), uncooled microbolometer 7.5–13 μm 25 μm Typical 12 ms Object temperature range Accuracy Spotmeter Area Isotherm Atmospheric transmission correction 10 10 boxes with max./min./average/position 1 with above/below/interval Automatic, based on inputs for...