Datasheet: FLINrail+ MultiVolt 100W+ FLINrail+ MuliVolt 100W+ Solar modules for the railing The FLINrail+ MultiVolt 100W+ is the next generation of our proven railing solar modules and the perfect solar solution for retrofitting. Thanks to a Vmpp of 60.5 V, the module can be used universally to charge 12 V, 24 V, and 48 V batteries via MPPT controllers. The solar module is simply hooked into the railing and can be used both at anchor and while sailing. themselves automatically. With the four corner clamps, the FLINrail+ MultiVolt 100W+ can be fixed continuously at any desired angle – for optimal alignment with the sun. With the new MultiVolt technology, sailors benefit from maximum flexibility and energy yield. The six integrated bypass diodes ensure optimum shade resistance and reliably prevent hotspots – even in complex installation situations or changing light conditions. As with the proven FLINrail+, the MultiVolt can be quickly and easily hooked into the railing wire. A line runs from each corner and disappears into the frame of the solar module. The loose ends are hooked into the foot rail or the lower railing wire using the carabiners. When the module is aligned, the loose lines automatically retract into the frame at the touch of a button and tension FLIN solar GmbH – Falckensteiner Str. 2, 24159 Kiel, Germany [email protected] – Februar 20

Note: The data listed are approximate values that are subject to production-related tolerances. FLIN solar GmbH - Falckensteiner Str. 2, 24159 Kiel, Germany [email protected] - Februar 2025