FLINkite+

FLINkite+

FLINkite+

Product catalog summary
Overview: The FLINkite+ is a versatile and portable flying solar module system designed for quick setup and efficient energy generation. It utilizes bifacial solar panels that capture sunlight from both sides, including reflected light from water surfaces, enhancing energy output. The system can be easily stored in a compact FLINbag when not in use.
Specifications:
  • Model Variants: Available in 2M, 3M, 4M, 5M, and 6M models.
  • Dimensions: Each module measures 548 mm x 548 mm x 1.75 mm, with reinforced frames on top and bottom modules.
  • System Height: Ranges from 3 m to 7 m depending on the model.
  • Minimum Mast Height: Ranges from 4.5 m to 8.5 m.
  • Cable Length: 900 mm from the bottom module.
  • Plug Type: MC4.
  • Pack Size: 680 mm x 565 mm x 100 mm.
  • Weight: Varies from 4.6 kg to 8.9 kg including the bag.
  • Max Wind Speed: Ranges from 28 kn to 14 kn depending on the model.
  • Power Output: Ranges from 80 W to 240 W, with bifacial power ranging from 104 W to 312 W.
  • Voltage and Current: VOC ranges from 21.6 V to 64.8 V, ISC is 4.8 A, and ISC bifacial is 6.2 A. VMPP ranges from 18.0 V to 54.0 V, IMPP is 4.4 A, and IMPP bifacial is 5.8 A.
  • Protection Class: IP67.
  • Efficiency: 23%.
  • Temperature Coefficients: Power: -0.24%/°C, Voltage: -0.25%/°C, Current: -0.06%/°C.
  • Bypass Diodes: Number varies from 2 to 6 depending on the model.
Notes: The provided data are guide values and may vary slightly due to production tolerances.
See more

Catalog excerpts

FLINkite+-1

Datasheet: FLINkite+FLINkite+ - Flying solar modules The handy FLINkite+ can be used flexibly, is set up quickly and delivers considerable daily yields. The square solar modules are placed over a halyard (e.g. spi halyard) and held in position by the center line of the system. The guidelines converge in a clamp, which is raked into the railing by means of the carabiners. Via the guidelines, the solar panels can be aligned around two axes so that they always point towards the sun. The bifacial solar panels also use their backside to generate energy: The light reflected from the water, which is captured by the back of the transparent solar panels, allows the FLINkite+ to gain even more energy. When the solar system is not needed, it can be stored in the small FLINbag. FLIN solar GmbH - Falckensteiner Str. 2, 24159 Kiel [email protected] - February 2025

 Open the catalog to page 1
FLINkite+-2

FLIN solar GmbH - Falckensteiner Str. 2, 24159 Kiel [email protected] - February 2025

 Open the catalog to page 2
FLINkite+-3

* The dimensions refer to one module. ** The top and bottom modules are reinforced with a 16.5 mm high frame. *** The cable length is measured from the bottom module. Note: The data listed are guide values which are subject to a production-related tolerance. FLIN solar GmbH - Falckensteiner Str. 2, 24159 Kiel [email protected] - February 2025

 Open the catalog to page 3

All FLIN solar GmbH catalogs and brochures

  1. FLINflex+

    3  Pages

  2. FLINstripes

    2  Pages

  3. FLINpole+

    2  Pages

  4. FLINrail+

    2  Pages

  5. FLINsail+

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.