video corpo

Push-Pull Cables

Push-Pull Cables

Push-Pull Cables

Product catalog summary
Overview: Flexball Italiana provides a comprehensive range of push-pull cables designed for both pleasure and professional boats. These cables are equipped with either brass or stainless steel terminals and are compatible with various marine engines.
Specifications:
  • Types and Applications: The cables are categorized by type codes (E2, E3, E4, E5, E6, E14) with specific applications such as Volvo Penta inboard and sterndrive, Mercury, Mercruiser, Mariner, Johnson, Evinrude, and OMC.
  • Dimensions: Each type has a stroke of 80 mm, with varying thread sizes and conduit diameters.
Ordering Instructions:
  • For all cables except E6, lengths are measured in feet. Conversion between feet and meters is provided.
  • For outboard motor installations, an additional meter (3 feet) is recommended for optimal engine movement.
  • The ordering code includes the type of cable and the length in feet, e.g., E5-13F for a 13-feet cable.
Accessories:
  • Clevis: The correct fork size is determined by the dimension “M1” from the drawings and tables.
  • Ball Joint: Various types (AS8, AS10, AS13, AS16) are available with different dimensions and codes.
  • Bulkhead Swivel: Specifications include dimensions for proper mounting on brackets.
Contact Information: Flexball Italiana S.r.l. is located in Orbassano, Italy, with contact details provided for further inquiries.
See more

Catalog excerpts

Push-Pull Cables-1

PUSH-PULL CABLES Flexball offers a full range of push-pull cables both for the pleasure boats and for the professional boats sector. All cables are supplied with either brass or stainless steel terminals. Type Conduit diameter Volvo Penta®: inboard, sterndrive Volvo Penta®: inboard, sterndrive Volvo Penta®: inboard, sterndrive Special applications Mercury® – Mercruiser® – Mariner® Johnson® – Evinrude® – OMC® SolidWorks Student License Solo uso accademico SolidWorks Student HOW TO ORDER License Solo uso accademico With the exception of E6 cables, which are used for special applications, the length of all the other cable is in feet. To convert feet to meters multiply by 0.305 and round to the nearest quarter of a meter. To convert meters to feet, divide by 0.305 and round up to next foot. If for example we need to use a 4.5 meter cable, the length in feet is: 4.5: 0.305 = 14.75 so, rounding to the next foot, the length to order is 15 feet. For installations with outboard motors it is advisable to add 1 meter (3 feet) to the measured length; this will allow the proper movement of the engine. The ordering code structure of the cable is as follows: E The parameters which must be filled into the table to specify the cable are x and ff: x = 1,2,3,4, 5 identifies the type of cable ff is the cable length in feet For example, if we order 13-feet cable type E5, the code is: E5-13F

 Open the catalog to page 1
Push-Pull Cables-2

ACCESSORIES CLEVIS To determine the right size of the fork, look at the dimension “M1” on the drawings and tables of Flexball, pull and push-pull cables. Fork code Note: Accessories with thread M5 can be used on cables with rod thread 10/32 UNF WR CONTROLS FLEXBALL ITALIAN

 Open the catalog to page 2
Push-Pull Cables-3

BALL JOINT WR CONTROLS FLEXBALL ITALIANA

 Open the catalog to page 3
Push-Pull Cables-4

BULKHEAD SWIVEL Note: “F” is the dimension of the hole that has to be drilled on the bracket where the bulkhead swivel will be fixed. The above picture shows the correct mounting of the bulkhead against the bracket. Flexball Italiana S.r.l. Via San Luigi 13/A - 10043 Orbassano (To) - Italy Tel 0039.011 90.38.900 - Fax 0039.011 90.38.747 [email protected] www.flexballitaliana.com

 Open the catalog to page 4
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.