Mechanical control These mechanical lever controls are available in several versions and fulfil all the possible application requirements including pleasure boats, passenger boats and professional vessels. There are also available versions for the direct control of electronic and CANBus motors. Single lever with dual action for the sequence command of gearbox and throttle. The button, when inserted into the body of the lever, disengages the gearbox and enables the acceleration of the engine in neutral (warm-up). Extremely smooth and precise, due to the bearings and sintered bronze bushings; there are no plastic parts. STROKES From 60 to 80 mm both for gearbox and throttle (you can get a fine regulation by tuning the slot inside the lever). box is available chrome plated, painted black or • Body stainless steel (only for the version with 1 motor). can be either chrome or stainless steel. Handle and • Lever button for warm-up are available red or black. FLEXBALL I T A L I A N A WR CONTROLS GROU

COMMAND CABLES SYSTEMS WITH TWO COMMAND STATIONS Command levers Series 3000 can be used with conventional push-pull cables E3 (thread 10/32), E4 (thread 1/4 x 28) E6 (thread M6) and the very performing Flexball cables Series 70 (M6 thread). There are two different philosophies and methods for connecting together levers 3000: Master/repeater: a master command station is connected to a repeater command station. In this case when moving one command station the other one follows automatically the movements of the first station. Sleigh: command stations are identical and are not directly linked together....

INSTALLATION SCHEME FOR 2 COMMAND STATIONS AND 1 MOTOR 3000 Repeater 1 motor Gearbox Throttle Note: mmmmm is the cable length in mm INSTALLATION SCHEME FOR 2 COMMAND STATIONS AND 2 MOTORS 3000 Repeater 2 motors Gearbox Throttle Gearbox Throttle Note: mmmmm is the cable length in mm FLEXBALL I T A L I A N A WR CONTROLS GROUP

INSTALLATION SCHEME FOR 2 INDEPENDENT COMMAND STATIONS Note: ff is the cable length in feet. Example: cable E3 L=10 feet → E3-10F

OVERALL DIMENSIONS FLEXBALL I T A L I A N A WR CONTROLS GROUP

DIMENSIONS, FOOTPRINTS AND DRILLING MASKS 3000 Lever for 1 motor 3000 Repeater for 1 motor 3000 Lever for 2 motors 3000 Repeater for 2 motors LEVER FOR 1 MOTOR REPEATER FOR 1 MOTOR LEVER FOR 2 MOTORS REPEATER FOR 2 MOTORS LEVER MASTER 1 MOTOR LEVER MASTER 2 MOTORS FLEXBALL I T A L I A N A WR CONTROLS GROUP

MECHANICAL CABLES AVAILABLE WITH LEVERS SERIES 3000 Flexball type 70 • with form M terminal type 70 • Flexball with form F terminal Note: mmmmm is the length in mm mm.mm is the length in meters

Flexball Italiana S.r.l. Via San Luigi 13/A - 10043 Orbassano (To) - Italy Tel 0039.011 90.38.900 - Fax 0039.011 90.38.747 [email protected] www.flexballitaliana.com FLEXBALL I T A L I A N A WR CONTROLS GROUP