PR 10
1Pages

{{requestButtons}}

Catalog excerpts

PR 10 - 1

TECHNICAL DATA SHEET PRIMER PR10 Revision: 01/2011 Technical Data: Base Consistency Colour Curing System Open Time(*) Flashpoint Specific Gravity Coverage (*) Values may vary depending on environmental conditions Product: Primer PR10 is a universal primer for use on timberand porous substrates based on MS Polymer containing solvent. Characteristics: - Liquid - Black in colour for ease of identification - Suitable for MS Polymer sealants Applications: - Pre-treatment of teak deck caulking rebates - Joint surfaces of porous materials with high moisture exposure. Packaging: Colour - Black Packaging – 500mL containers Shelf life: 18 months in unopened packaging in a cool and dry storage place a t temperatures between +5°C and +25°. Page 1 of 1 MS Polymer Liquid Black Moisture Cure, Physical Drying and Absorption Ca. 60 Minutes (20°C & 65% R.H) 40°C 0.3 g/mL Approx. 5m2/L Surfaces: Type: all porous surfaces, timber, brick and concrete. State of Surface: clean, dry, free of dust and grease We recommend a preliminary compatibility test. Application: Method: brush Application Temperature: +5°C to 35°C Clean Up: with Methylated Spirits or acetone immediately after application Recommendation: after application of Primer PR10, wait a minimum of 60minutes , and a maximum of 20 hours before applying Fixtech MS Polymer sealants. Health and Safety Recommendation: Apply the usual industrial hygiene. Wear gloves . Safety Glasses. Remarks: If the 20 hour maximum open time has passed before application of the sealant, re-apply Primer PR10. Precautions must be taken to ensure dust or other contaminents do not settle into the before the sealant is applied. Compatibility tests recommended. Note: The contents contained in this documentation are the result of our experiments and our experienceand have been submitted in good faith. Because of the diversity of the materials and substrates and the real number of possible applications which are out of our control we cannot accept any responsibility for the results obtained. In every case it is recommended to carry out preliminary experiments and compatibility tests. Fixtech Pty Ltd. PO Box 568, Southport, Qld 4215. Tel: +61 (0)7 5530 1099. Fax: +61 (0)7 5530 1322 Email: info@fixtech.com.au Web: www.fixtech.com.au

Open the catalog to page 1

All Fixtech Marine Solutions catalogs and brochures

  1. FIX3

    2 Pages

  2. Fixseal

    2 Pages

  3. FIX1DC

    2 Pages

  4. FIX 30

    3 Pages

  5. FMP100

    1 Pages

  6. PR 20

    1 Pages

  7. MSP 300

    3 Pages

  8. MSP CLEAR

    2 Pages

  9. MP 101

    2 Pages

  10. FS 200

    2 Pages

  11. MSP 100

    2 Pages

  12. FMP 200

    2 Pages

  13. MSP 15

    2 Pages

Archived catalogs

  1. PR 30

    1 Pages

  2. AC 50

    1 Pages

  3. FAC 240

    2 Pages