*mynauticexpo

MP 101

Product catalog summary

Product Overview: MP101 Extra Fine Filler is a high-quality, two-component polyester putty based on unsaturated polyester resins. It is designed for easy application with a very fine-grained structure, offering a fast-drying and flexible solution that can be sanded before fully cured.

Technical Specifications:

Base: Amine Pre-accelerated Polyester Resins
Consistency: Stable Paste
Curing System: Chemical reaction
Open Time: 5 minutes
Can Be Sanded: Approximately 30 minutes
Hardness: Approximately 78 Shore D
Application Temperature: +10°C to 25°C
Specific Gravity: 1.88 g/mL
Temperature Resistance (cured): -30°C to 115°C

Application Areas: Suitable for repairing scratches and damage in marine and transport industries, including buses, cars, boats, and in the manufacture of molds and finishing. It can be used on polyester and vinylester resins, wood, aluminum, steel, concrete, brickwork, and other common substrates. It is also suitable as a finishing layer before painting.

Packaging and Shelf Life: Available in a 1 Kg metal tin, with a shelf life of 12 months when stored in unopened packaging in a cool, dry place at temperatures between +5°C and +25°C.

Surface Preparation: Surfaces should be abraded, clean, dry, and free of dust and grease. Rough sanding improves adhesion. For steel and stainless steel, rust should be removed. Clean up with acetone.

Health and Safety Recommendations: Apply standard industrial hygiene practices, including wearing gloves and safety glasses, and ensuring adequate ventilation.

Remarks: MP101 can be overpainted, but compatibility tests are recommended due to the variety of paints and varnishes. It must be top-coated and sealed for use below the waterline.

Catalog excerpts

TECHNICAL DATA SHEET MP101 - EXTRA FINE FILLER Revision: 01/2011 Technical Data: Base Consistency Curing system Open Time(*) Can Be Sanded (*) Hardness Application Temperature Specific Gravity Temperature Resistance (cured) (*) Values may vary depending on environmental conditions Product: MP101Extra Fine White Filler is a high quality two component polyester putty based on unstaturated polyester resins. Characteristics: - Easy application - Very fine grained structure - Two components - Fast drying - Can be sanded before fully cured - Permanent Bond - Flexible Application Areas: - Repair of scratches and damage in the marine and transport industries. For use on buses, cars, boats and in the manufacture of moulds, plug work and in fairing and finishing. - Suitable for use on polyester and vinylester resins, wood, aluminium, steel, can be used on concrete, brickwork and many other common substrates.

Open the catalog to page 1

TECHNICAL DATA SHEET MP101 - EXTRA FINE FILLER Note: The contents contained in this documentation are the result of our experiments and our experienceand have been submitted in good faith. Because of the diversity of the materials and substrates and the real number of possible applications which are out of our control we cannot accept any responsibility for the results obtained. In every case it is recommended to carry out preliminary experiments and compatibility tests. Fixtech Pty Ltd. PO Box 568, Southport, Qld 4215. Tel: +61 (0)7 5530 1099. Fax: +61 (0)7 5530 1322 Email: [email protected]...

Open the catalog to page 2