FIX3
2Pages

TECHNICAL DATA SHEET Technical Data: Base Hybrid Silane Consistency Paste easy to spread Curing System Moisture Cure, Neutral Cure Paintability Not Paintable Colours Teak Skin Formation 40 minutes (230C & 50%R.H) Tack Free Time 3 Hours (230C & 50%R.H) Curing Rate 3mm/24 Hrs Density 1.41 g/cm3 Shrink None Elongation 150-250% Hardness (Shore A) 40±5 Tensile Strength >1.1 Mpa (ISO8339) Shear Strength > 1.1 Mpa (ASTM D1002) Movement Capability 25% - 30% maximum (*) Values may vary depending on environmental conditions Product: Fix3 is a high quality high strength single component specialist adhesive sealant, suitable for adhering Flexiteek, composite PVC based marine deck system, Stazo Marine deck 2000 and other cork decks such as Aquadeck. Fix3 is suitable for bonding to substrates such as, fibreglass, aluminium, steel, concrete ceramic tiles and most other common substrates. Fix3 is suitable for exterior and interior finish wipes. Characteristics: - Primerless adhesion on most substrates (except Teflon, PE and PP) - Excellent UV resistance and colour fast - Very good gap filling capabilities - Neutral cure, suitable for stone - Excellent stability, suitable for marine exposure - Superior weather resistance up to 20 years - Permanently elastic Paint, varnish and other coatings do not adhere to Fix3. Be sure to thoroughly clean any surrounding surfaces that are to be painted with a good industrial alcohol cleaner to remove any contaminants that may cause “Fish Eye”!. Test surfaces before painting. Applications: Fix3 is suitable for bonding Flexiteek, PVC composite, cork and other decking materials. Once fully cured, an elastic non-shrink adhesive layer is formed, which is resistant to moisture and heat. Fix3 has excellent adhesion to most common substrates within the marine, transport and construction industries. Packaging: Colour – Teak Packaging – 600mL foil sausage. Note: The contents contained in this documentation are the result of our experiments and our experienceand have been submitted in good faith. Because of the diversity of the materials and substrates and the real number of possible applications which are out of our control we cannot accept any responsibility for the results obtained. In every case it is recommended to carry out preliminary experiments and compatibility tests. Fixtech Pty Ltd. PO Box 568, Southport, Qld 4215. Tel: +61 (0)7 5530 1099. Fax: +61 (0)7 5530 1322 Email: info@fixtech.com.au Web: www.fixtech.

TECHNICAL DATA SHEET FIX3 Page 2 of 2 Shelf life: 12 months from date of production; In unopened packaging stored in a cool and dry place a t temperatures between +5°C and +23°. State of substrate surfaces: To be made clean, dry, free of dust, grease and any loose particles. Porous surfaces: For some porous substrates Fixseal Epoxy Sealer may be applied or a good quality epoxy sealer. Timber and porous surfaces can be precleaned with acetone (wait till dry) before applying Fixseal Epoxy Sealer. Non Porous surfaces: substrates may be pre cleaned with a good quality industrial alcohol; change...