TECHNICAL DATA SHEET FIX1DC-DECK CAULKING Revision: 01/2012 Technical Data: Base Consistency Curing system Paintability Skin Formation(*) Cure Rate (*) Hardness (Shore A) Change In Volume Specific Gravity Maximum Deformation Temperature Resistance (cured) Elastic Modulus 100% Tensile/Shear Strength Elongation At Break Application Temperature: (*) Values may vary depending on environmental conditions Product: Fix1DC is a high quality single component adhesive sealant with a low viscosity, excellent adhesive properties designed for Teak and Synthetic Teek caulking. Fix1DC is moisture curing and forms a permanent elastic product. It is chemically neutral, suitable for use in marine, transport and construction areas, where a strong flexible UV and soap resistant rubber bond is required. Characteristics: - Easy application - High extrudability and good workability - Ecological advantages, free from acids, isocyanates, solvents, Phthalates, halogens. - Excellent sandability after full cure (3-5 Days for best results) - Excellent mechanical properties - Flexible elastic rubber – movement accomodation up to 30% - No bubble formulation within the sealant - UV stable and colour fast Fix1DC is Not Paintable, Withstands all climatic conditions and suitable for use where pH neutral soap cleaning will occur. Verified by NOHSC as non-hazardous and ROHS as compliant for heath reasons. Note on Paintability: Paint, varnish and other coatings do not adhere to Fix1DC Deck Caulking. After sanding the deck including the caulking, be sure to thoroughly clean any surrounding surfaces that are to be painted with a good industrial alcohol cleaner to remove any contaminants that may cause “Fish Eye”!. Test surfaces before painting. Applications: Fix1DC is suitable for the caulking of seams in real teak, most other timber types, cork and Synthetic Teak decking. Please consult our technical department for substrates outside the above. Note: The contents contained in this documentation are the result of our experiments and our experienceand have been submitted in good faith. Because of the diversity of the materials and substrates and the real number of possible applications which are out of our control we cannot accept any responsibility for the results obtained. In every case it is recommended to carry out preliminary experiments and compatibility tests. Fixtech Pty Ltd. PO Box 568, Southport, Qld 4215. Tel: +61 (0)7 5530 1099. Fax: +61 (0)7 5530 1322 Email: [email protected] Web: www.fixtech.com.au

TECHNICAL DATA SHEET Packaging: Colour – Black Packaging – 600mL foil bag Shelf life: 12 months Foil Bags from production date, in unopened packaging stored in a cool and dry storage with temperatures between +5°C and +25° (Maximum). Hotter storage will reduce shelf life significantly. Surfaces: State of Surface: Solid without cracks or fissures, clean, dry, free of dust, debris and free of any residue oils or release agents. Sealing/Priming: • For teak timber and other porous substrates we recommend Fixseal Epoxy Sealer/Primer timber sealer be applied after pre-wiping the surface down with clean...