FAC 240
2Pages

TECHNICAL DATA SHEET FM30 FUEL MASTER SEALANT Revision: 01/2011 Page 1 of 2 Technical Data: Base Consistency Colour Curing System Skin Formation Tack Free Time Curing Rate Change in Volume Hardness Shore A Maximum Deformation Weight Loss Polysulfide Thick paste Grey : Base (white) Accelerator (black) Chemical cure (2 pack) Ca. 30 minutes (23°C & 55% R.H.) 5 Hrs (23°C & 55% R.H.) 6 Hrs to emersion, full strength 7 days @ (23°C/55% R.H.) 5% 60 No cracking when bent 180° over a 3mm mandrel. No more than 6% loss of sealant compound after fluid immersion 1.61 gm/L -18°C until +121°C Intermittent exposure to 182°C Thixotropic, does not slump +300% >2.0 N/mm2 (ISO 8839) >2.0 N/mm2 (ASTM D1002) Does not blister or sponge None Meets MIL-STD 9 months 98% Specific Gravity Temperature Resistance Character Elongation at Break Tensile Strength Shear Strength Thermal Rupture Resistance Corrosion Fungus Resistance Shelf Life Non Volatile Content (*) Values may vary depending on environmental conditions Product: FM30 Fuel Master Sealant is a 2 part, Polysulfide based product for use as a long application life, quick cure sealant for integral fuel tanks and fuselages. The mixed compound has a thixotropic non-sag consistency and can easily be applied by spatula, extrusion gun or piping bag to verticle surfaces. FM30 will cure to a fuel resistant rubber at temperatures above 6.67° C and exhibits excellent tooling caapbilities with very low shrinkage. Characteristics: - Excellent adhesion on most substrates (except Teflon, PE and PP) - Good filling capacities Specification Standard: STM 40-113 Qualified AMS-S-8802 Qualified P.S. 11346 Qualified TAPS 1163 Type I Qualified MEP-09-096 Qualified RLD.JA.001 Qualified NA-66-1032 Qualified BMS 5-26U Type II Meets Requirements Applications: Repair and construction of fuel tanks, fuselages and fuel cell cavities. Note: The contents contained in this documentation are the result of our experiments and our experienceand have been submitted in good faith. Because of the diversity of the materials and substrates and the real number of possible applications which are out of our control we cannot accept any responsibility for the results obtained. In every case it is recommended to carry out preliminary experiments and compatibility tests. Fixtech Pty Ltd. PO Box 568, Southport, Qld 4215. Tel: +61 (0)7 5530 1099. Fax: +61 (0)7 5530 1322 Email: info@fixtech.com.au Web: www.fixtech.com.au

TECHNICAL DATA SHEET FM30 FUEL MASTER SEALANT Revision: 01/2011 Page 2 of 2 Packaging: Colour – Grey Packaging – 500ml Kit 10:1 mix ratio Health- and Safety Recommendation: Apply the usual industrial hygiene. Wear gloves . Safety Glasses. Respirator. Shelf life: 9 months; In unopened packaging in a cool and dry storage place a t temperatures between +5°C and +25°. Remarks:'Application life refers to the length of time the mixed compound remains at a consistency suitable for application with spatula or caulking gun. Application life is always measured as a standard temperature of 23°C with a...