Tel: 6862 8233 Fax: 6861 0733 Email: [email protected] www.fiveab.com.sg CENTURION 24ALUMINIUM WORKBOAT PRINCIPLE DIMENSIONS FUEL TANK CAPACITY= MATERIAL = 1.2m (GUNWHALE HT AT MIDSHIP TO KEEL) APPROX 0.6M UNLADEN 0.6 M) WITH DRIVE DOWN APPROX 2500KG LIGHTSHIP,UNLADEN SINGLE ISUZU UM4BG1TCX (197HP) MARINE DIESEL ENGINE WITH MARINE GEAR 1.97:1 OR AS REQUIRED (SUBJECT TO AVAILABILITY) BUILT IN 400 LITRES FUEL TANK UNDERFLOOR MARINE GRADE ALUMINIUM ALLOY(5083H321) ALUMINIUM ALLOY CHECKER PLATE, 4MM THK STANDARD CONFIGURATION 1) MULTIPLE CHAMBERS CONSTRUCTION, POLYSTYRENE FOAM BLOCK FILLED 2) MARINE GRADE ALUMINIUM ALLOY CONSTRUCTION 3) MULTIPLE TRANSVERSE & LONGITUDINAL FRAME REINFORCEMENT STRUCTURES UNDER DECK TO SUPREME'S DESIGN 4) FULLY WELDED KEEL AND CHINES WITH ADDITIONAL REINFORCED KEEL AND CHINES USING RIGHT ANGLE SECTION AS INDICATED IN DRAWING. 5) ALUMINIUM ALLOY CHECKER PLATE DECK - FULLY WELDED TO HULL SIDE PLATE. 6) SELF DRAINING COCKPIT WITH TWIN DRAINAGE HOLE TOWARDS STERN 7) FOUR (4) NOS ALLOY CLEATS 8) 100MM WIDTH ALUMINIUM ALLOY GUNWHALE SECTION (SEE DRAWING) 9) 400 LITRES ALUMINIUM ALLOY FUEL TANK WITH BAFFLES AND PRESSURE TESTED AND BOLTED DOWN IN UNDERFLOOR CHAMBER 10) FORWARD BOW PLATFORM ABOUT 1 METRE LENGTH WITH CENTRE BOARDING RAILS USING 1 %” DIAMETER ALLOY TUBING FULLY WELDED TO DECK 11) SIDE HOLDING HANDRAILS USING 1 %” DIAMETER ALLOY TUBING FULLY WELDED TO GUNWHALE

12) FORWARD STEERING CONSOLE WITH HYDRAULIC STEERING SYSTEM AND CONNNECTED TO RUDDER. 13) BOAT IS UNPAINTED AND IN NATURAL ALUMINIUM COLOUR. 14) 2 NOS ALUMINIUM BOX TYPE SEATINGS WITH STORAGE UNDER FOR 6 MEN LOCATED AT PORT AND STARBOARD SIDES AT REAR COCKPIT 15) REMOVEABLE ALUMINIUM FRAME SEATING FOR COXWAIN AT DRIVING CONSOLE 17) 4 NOS. LIFTING RINGS FULLY WELDED TO GUNWHALE WITH REINFORCEMENT WELDED 18) 2 NOS REAR TOWING POST WELDED ONTO PORT AND STARBOARD STERN 19) AL ALLOY PROPELLER RING AS INDICATED IN DRAWING 20) ALUMINIUM ENGINE ROOM BOX COVER WITH VENTILATION FINS ON SIDE. 21) HEAVY...

8) 1 NO. FUEL EMERGENCY SHUT OFF COCK WITH FUEL HOSE 9) 1 NOS. 1500GPH RULE BILGE PUMP WITH AUTOMATIC FLOAT SWITCH 10) STAINLESS STEEL RUDDER BLADE WITH RUDDER STOCK AND PACKING GLAND QUALITY CONTROL TEST 1) 24 HOUR WATER LEAK TESTING ON HULL AT PRODUCTION STAGE. - UPON OVER-TURNING OF HULL BOTTOM, THE HULL SHALL BE FILLED WITH WATER AND LEFT STANDING OVERNIGHT FOR 8 HRS. - VISUAL INSPECTION TO BE CARRIED OUT AT ALL WELDED JOINTS BELOW WATER LEVEL FOR SIGNS OF WATER LEAK - DRAIN WATER AND DRY HULL AFTER TEST. 2) ENGINE STARTING AT OUR FACTORY BEFORE DELIVERY TO OWNER'S FREIGHT FORWARDER - THE...

CENTURION 24 WORKBOAT POWERED BY ISUZU 197HP@2800RPM GEAR RATIO: 1.97:1 TOP SPEED: 19 KNOTS

This design and drawing Is the expressed Intellectual property rights of Five Aluminium Boat & Engineering Pte Ltd and may not he distributed or copied by any 3rd parties without the written consent. The company will not hesitate to Institute legal proceedings against any 3rd party for any act of Infringement. 06' HEAVY DUTY 'D' FENDER CENTURIDN 24 DIL SPILL WDRKBDAT LENGTH OVERALL i 7.30M PROPULSION : PROPELLER CKDi EDVARD □IL SPILL WORK BOAT GENERALARRANGEMENT ver\fiveab\BDATS\GA\Centurion\Centurion 24 Dil Spill WorkboatXCenturion 24 Dil spill Workboat.dwg UNLESS OTHERWISE STATED ALL DIMENSIONS...