MINI FITLOCK IN ACETAL RESIN / NYLON M in all directions PATENTED SYSTEM • Precise and quick assembly • Versatility of use • Minimum size Designed for cladding ceiling panels and walls of any kind, Fitlock® fastening offers high performance in terms of stability and reliability. Mini Fitlock has been designed for mounting small-sized panels also on walls/brackets with reduced thickness. Easy to install, remove, and place, Fitlock® simplifies the hardest procedures of inspection, maintenance, and recovery. MANUAL POSITIONING In the installation stage, the fixing points can be marked on the panels using a marker (code MM) for an error-free pre-arrangement. For a perfect milling, use the PFMFL assembly drill bit. SPACER It allows to adjust the gap between the panel and the bracket. Fitlock® is a pressure fixing system which offers unique benefits for mounting of panelling. Mini Marker CAD-CAM POSITIONING Thanks to the DWG files supplied, the fixing points can be positioned on the panels in the design/production stage. Fitlock® is the innovation that revolutionizes the pressure fixing assembly. SOFT M Male F Female Complete Normal force required for release Material Acetal resin / Nylon Acetal resin Recess/hole diameter Flat diameter Full weight Screws to be used

FITLOCK® · FITKITE® · FITPAN® · FITFLOOR® · FITJUMP® FITGRID® · FITCLOCK® · FITBLOCK® Fitlock is a registered trademark by: Via L. Fibonacci 924 56031 Bientina (Pisa), ltaly Phone +39 0587 756407 · Fax +39 0587 756407 fitlock.it · [email protected] NOTICE: The above information and provisions, although reflecting our best experience, shall be deemed as merely indicative and shall be confirmed by exhaustive practical applications. Therefore, before using the product, those who intend to use it shall determine whether it is suitable for its intended use and anyway shall undertake all responsibility...