ITEM FITKITEFREE FITKITE FREE IN PLASTIC/STEEL connection safe and practical PATENTED SYSTEM • Inspections in complete safety • Easy installation • Suitable also for after-sale Fitkite® is the clutched fixing system that increases the benefits of Fitlock in the inspection stage. Thanks to the adjustable clutch, Fitkite® allows to reduce and envisage the descending speed of the panel, thus allowing to uncouple the panel safely in case of inspection without the risk of an accidental fall. Furthermore, in the event of free accidental fall, it makes the inspection tasks particularly safe. This version has been developed to be installed directly on the gratings, where there is no ceiling structural supports. Fitkite® allows to remove the panel from its seat and leave it hanging, thus speeding inspections, maintenance and any kind of task by making the operator autonomous in movements. Fitkite® allows the operator to carry out the tasks in complete safety and autonomy, avoiding the risk of injuries or any damage in case of unintentional release, as the clutch system would lock the panel immediately. Complete Material Hole diameter Screws to be used Fitkite® is the innovation that revolutionises the pressure fixing assembly. INSTALLATION MANUAL POSITIONING In the installation stage, for an errorfree pre-arrangement, prepare the seat for the clutch part, then mark the hook positioning point using the position marker (code M). CAD-CAM POSITIONING Thanks to the DWG files supplied, the fixing points can be positioned on the panels in the design/production stage. WARNING Once the elements have been installed and the cable secured to the metal hook, bring the sleeve into contact, as shown in the figure. To safely activate the functioning when opening: press the central metal button on the Fitkite® body. FITKITEFREE Plastic/Steel ⌀ 41 mm ⌀ 3.5 mm countersunk flat head scre

To safely activate the functioning when opening: press the central metal button on the Fitkite® free body. FITLOCK® · FITKITE® · FITPAN® · FITFLOOR® · FITJUMP® FITGRID® · FITCLOCK® · FITBLOCK® Fitlock is a registered trademark by: Via L. Fibonacci 924 56031 Bientina (Pisa), ltaly Phone +39 0587 756407 · Fax +39 0587 756407 fitlock.it · [email protected] NOTICE: The above information and provisions, although reflecting our best experience, shall be deemed as merely indicative and shall be confirmed by exhaustive practical applications. Therefore, before using the product, those who intend to use...