Mini Monitor Module: VF5608-0M Mini Input Modules USCG Type Approved 161.002/A53/0 Standard Features - Designed for use where space is limited - Features a short circuit isolator as standard - Interrupt/non interrupt in one unit - “Pre-alarm” status available - LED status indication (Yellow Fault, Green - Polling, Red Alarm) - DIN Rail mountable Indicates alarm condition Indicates polling constant, short circuit on loop wiring It is designed to monitor the state of one or more single pole, volt free contacts connected on a single pair of cables and to report the status to Apollo compatible analog control equipment. Please note: When the eighth section of the DIL switch is changed, the Fireboy-Xintex Mini Monitor Module will change the type code it sends to the panel. pulsing, fault on the monitored circuit Wiring options for the Mini Switch Monitor Technical Specifications Protocol: 5-9V Current Consumption at 24V The Fireboy-Xintex Mini Monitor Module, part no VF5608-0M, is a loop-powered device, which incorporates a monitored input circuit for connection to switches. The module is supplied in a small housing designed to fit into an electrical box, or to be DIN Rail mounted. The Fireboy-Xintex Mini Monitor Module has an optional priority interrupt facility to give fast response and can be fitted in an electrical box behind a pull station. This option is selected via the eighth section of the DIL switch. The mini switch monitor has three status LEDs: LED Operated Alarm: 3.4mA +Quiescent Remote and LED Alarm: 6.2mA +Quiescent Switch Fault LED: +2.8mA (pulsing 0.5s on, 0.5s off) 3 Alarm End of Line Optional Remote LED Releasing Clip Fig 2 - Mini Switch Monitor on a DIN Rail Fireboy-Xintex, Inc. Fireboy-Xintex, Ltd O-379 Lake Michigan Drive Unit 10 Holton Road, Holton Industrial Estate Grand Rapids, MI 49534 . 616.735.9380 Poole, Dorset BH166LT UK . 44 (0) 845 389 9462