Catalog excerpts
USCG Type Approved 161.002/A53/0 Standard Features - Protects against water ingress - Improved performance - Available in polycarbonate or metal Overview The Deckhead Mounting Box is a device which protects bases, sounder bases and sounder beacon bases from the ingress of water or other liquids. It is screwed to the soffit and accepts a variety of Apollo bases. The Deckhead Mounting Box is used on its own in most cases but there are applications where either an extension sleeve or an adaptor ring is required. The Extension Sleeve is required when fitting heater or deep bases; the Adaptor Ring is needed for fitting sounder bases, beacon bases or sound beacon bases. The Extension Sleeve and the Adaptor Ring are sold as an Accessory Kit. The Deckhead Mounting Box has 6 cable access ports for M20 glands and is secured to the mounting surface via two 5.4mm holes in the webs. Fireboy-Xintex, Inc. O-379 Lake Michigan Drive Grand Rapids, MI 49534.616.735.9380 iHsecr-xiNrEX www.Fireboy-Xintex.com Fireboy-Xintex, Ltd Unit 10 Holton Road, Holton Industrial Estate Poole, Dorset BH166LT UK . 44 (0) 845 389 9462
Open the catalog to page 1All Fireboy - Xintex catalogs and brochures
-
Sounder Beacon Base1 Pages
-
Relay Output Module1 Pages
-
Elite RSM Fire Alarm Control2 Pages
-
Methane Detectors4 Pages
-
Elite Networking2 Pages
-
Sounder Control Module1 Pages
-
Low Power Relay Base1 Pages
-
Isolating Base1 Pages
-
4? Mounting Base1 Pages
-
Mini Monitor Module1 Pages
-
Isolator1 Pages
-
Discovery Heat Detector2 Pages
-
12 Ah Battery2 Pages
-
Multi Flex Sounder Base2 Pages
-
Multi-Tone Strobe3 Pages
-
Wall Mount Horn/Strobe4 Pages
-
Fire Suppression & Detection13 Pages
-
fire alarm2 Pages
-
propaneSystems4 Pages
-
MONITOR UP TO 16 ZONES1 Pages
-
Elite RS-M2 Pages
-
FIRE DETECTION SYSTEM1 Pages
Archived catalogs
-
MethaneFumeDetector.pdf1 Pages
-
Carbon monoxide detector12 Pages
-
GA Series2 Pages
