AGC 150 Hybrid Genset and PV controller
24Pages

{{requestButtons}}

Catalog excerpts

AGC 150 Hybrid Genset and PV controller - 1

DATA SHEET AGC 150 Hybrid Genset and PV controller

Open the catalog to page 1
AGC 150 Hybrid Genset and PV controller - 3

The AGC 150 Hybrid controller contains all the functions needed to protect and control a system that includes gensets, up to 16 inverters, and a mains connection. The AGC 150 is a compact, all-in-one controller. Each AGC 150 contains all necessary 3-phase measuring circuits. All values and alarms are shown on the LCD display screen, which is sunlight-readable. Operators can easily control the system from the display unit. Alternatively, use the communication options to connect to an HMI/ SCADA system. Greenfield and brownfield applications The AGC 150 Hybrid controller is ideal for...

Open the catalog to page 3
AGC 150 Hybrid Genset and PV controller - 4

Greenfield applications Hybrid application with a genset, PV and mains One AGC 150 Hybrid controller can control an application with a single genset, PV, and mains. The AGC 150 regulates the genset governor and AVR. It also controls the PV breaker and the mains breaker. For the genset regulation, you can use the AGC 150 analogue outputs. Alternatively, regulate the governor and AVR using the ECU. L4 Engine control Breaker feedback and control Inverter control Off-grid hybrid application The AGC 150 Hybrid controller can control an application that combines PV power with genset power. It...

Open the catalog to page 4
AGC 150 Hybrid Genset and PV controller - 5

Brownfield applications Adding PV to an application with synchronising gensets When PV power is added to a power management system, the application can include up to two synchronising gensets. The power management system can be from any supplier. The power management system controls Genset 1 and 2, as well as the genset breakers. The AGC 150 Hybrid controller is not part of the power management system. To control the photovoltaic power, three sets of nominal settings are used in the AGC 150 Hybrid controller. Different nominal settings are used in the AGC 150 Hybrid controller when both...

Open the catalog to page 5
AGC 150 Hybrid Genset and PV controller - 6

Breaker feedback Breaker feedback and control Inverter control Use digital inputs and M-Logic for the feedback from the ATS and genset breakers. Green: The controller power is ON. OFF: The controller power is OFF. Display screen* Resolution: 240 x 128 px. Viewing area: 88.50 x 51.40 mm. Six lines, each with 25 characters. Move the selector up, down, left and right on the screen. Enter the Menu system. Confirm the selection on the screen.

Open the catalog to page 6
AGC 150 Hybrid Genset and PV controller - 7

AUTO mode The controller automatically starts and stops (and connects and disconnects) the genset. The controller also automatically connects and disconnects the PV and mains. No operator actions are needed. Silence horn Turns off an alarm horn (if configured) and enters the Alarm menu. Shortcut menu Access the Jump menu, Mode selection, Test, Lamp test, and Hybrid (PV semi start and stop). SEMI-AUTO mode The operator or an external signal can start, stop, connect or disconnect the genset. The operator or an external signal can also open and close the other breakers (PV and mains)....

Open the catalog to page 7
AGC 150 Hybrid Genset and PV controller - 8

Typical wiring for the Hybrid controller Digital input (configurable) Emerg. stop Analogue input Engine start Hybrid functions Spinning reserve If there is a mains connection, the AGC 150 Hybrid controller can start and stop the genset to provide a spinning reserve. The spinning reserve can be a percentage of the PV power production or the mains import. Ideal for self-consumption applications While in grid parallel mode, the AGC 150 Hybrid can feed surplus PV energy to the grid and generate profit in accordance with grid operator feed-in tariffs. Alternatively, the controller can regulate...

Open the catalog to page 8
AGC 150 Hybrid Genset and PV controller - 9

Hybrid functions PV breaker feedback and control Inverter monitoring Inverter start/stop logic Weather station support Genset functions Genset load management In any operation mode, the AGC 150 Hybrid controller automatically maximises the sustainable power penetration (depending on the total load demand) while it makes sure that the genset(s) have the required minimum load. The minimum genset load prevents reverse power, impure combustion, and exhaust problems. Generator functions Synchronising functions Synchronising (static) Built-in analogue AVR control External analogue AVR control via...

Open the catalog to page 9
AGC 150 Hybrid Genset and PV controller - 10

Operation modes Island mode Load take-over Fixed power Mains power export Peak shaving Ventilation Analogue load sharing (with IOM 230) Digital load sharing (CANshare) * When only PV is connected to the mains. Load sharing Engine functions Start and stop functions Start and stop sequences Temperature-dependent cooling down Time-based cooling down Configurable crank and run coil Governor regulation using: • Engine communication • Built-in analogue control • External analogue control using IOM 230 • Relays Manual speed control using: • Digital inputs • Display screen menu (by the operator) •...

Open the catalog to page 10
AGC 150 Hybrid Genset and PV controller - 11

Engine protections Start failure Stop failure Stop coil, wire break alarm Engine heater Operate time Fuel fill check Maintenance alarms Fuel usage monitoring Fuel pump logics Sets of nominal settings General controller functions 4th current measurement (select one) • Mains current (and power) Neutral current (1 × true RMS) Ground current (with 3rd harmonic filter) General functions Emulation for testing and front load commissioning Built-in test sequences (Simple test, Load test, Full test, and Battery test) PLC logic (M-Logic) Counters, including: • Breaker operations • kWh meter (day,...

Open the catalog to page 11
AGC 150 Hybrid Genset and PV controller - 12

Setting and parameter functions Quick setup User permission level Password-protected setup Event logs with password, up to 500 entries Supports multiple languages (including Chinese, Russian, and other languages with special characters) 20 configurable graphical screens Graphical display with six lines Parameters can be changed on the display unit Modbus TCP/IP Configurable Modbus area Display and language functions Modbus functions Supported photovoltaic systems DEIF hybrid controllers are compatible with photovoltaic (PV) systems from a wide range of manufacturers. SunSpec compliance All...

Open the catalog to page 12
AGC 150 Hybrid Genset and PV controller - 13

Exhaust after-treatment (Tier 4/Stage V) AGC 150 supports Tier 4 (Final)/Stage V requirements. It provides monitoring and control of the exhaust after-treatment system, as required by the standard. More information See the AGC 150 Operator's manual for more information. AGC 150 includes an emulation tool to verify and test the functionality of the application, for example plant modes and logics, breaker handling, mains and generator operation. Application emulation is useful for training, customising plant requirements and for testing basic functionality that needs to be set up or verified....

Open the catalog to page 13

All Fidlock Gmbh catalogs and brochures

  1. AGC-4 Mk II

    4 Pages

  2. AMC 600

    38 Pages