Catalogs >
Fastmount Ltd >
PC-SM2

PC-SM2
1Pages

Catalog excerpts

STANDARD PC RANGE PC-SM2 PRODUCT GUIDE PC-SM2 Surface Mount Male Adhesive Fix - 11lb The PC-SM2 surface mount male is designed for use with thin walled panels and where installers prefer an adhesive fix. It is ideal for new composite materials. Patented SuperGrooveTM base mechanically engages into a 2 part epoxy on the base for secure mounting. Compatible with all female clips in the Standard Range, and has a 11lb pull out load. Refer to Panel Offset Guide for information about gap between substrate and panel, pull out and shear loads. PC-SM2 BENEFITS • Self-aligning secure mounting (11lb per clip) • Installation requires no special tools or skilled labor • Use a 2 part epoxy • No drilling of panels, fast installation • Works with existing Fastmount clips • Allows for flexing and expansion of panel and support frame MATERIAL: White Acetal copolymer • Mounting thin walled panels less than 0.24” thick • Soft or honeycomb cored panels with thin facings • Mounting panels where no drilling is preferred • Ideal for refit MORE INFO: Installation Guide PC-F1A, SF1, RF1 Clip Layout Guide TD-02, 09, 12 Panel Offset Guide INSTALLATION: Partially exploded through section showing typical installation method PC-F1A clip screwed into support frame SuperGrooves shown without glue PC-SF1 clip screw fixed Note: 0.17” gap between panel + substrate when used with PC-F1A Panel glued to PC-SM2 • Thin prefinished panels • Panels to be mounted with no drilling • Soft cored or thin faced panels PROUDLY DESIGNED IN NEW ZEALAND 27 | FASTMOUNT TECHNICAL GUIDE 2024 0.7” gap between panel and substrate when used with PC-SF1 2 part epoxy adhesive applied to PC-SM2 flows around SuperGrooves Subject to change without notice. Version: PC-SM2 - 06

Open the catalog to page 1