Snap-In gauges
2Pages

Snap-In Multifunction Gauges Designed to SAE specifications for Dust, Vibration and Water intrusion. The Faria Snap-In instruments provide a Heavy Duty instrument in a easy to install push-in case manufactured in the USA. This multifunction instrument provides many useful features in a small compact design. Available functions include; Inductive Tachometer, Hourmeter, Programmed Service Intervals and an analog discrete function (Ammeter, Voltmeter, Water Temp, Oil Temp, Oil Pressure, Fuel Level, Fuel Pressure) Patented Design Inductive Tachometer with Hourmeter Programmable Service Intervals with alarm US standard and metric values Poly carbonate cases for corrosion resistance and long life • No hassle mounting - reduces installation time • Available with or without embedded Digital Hourmeter • 2 inch gauges - Ammeter, Voltmeter, Water Temp, Oil Temp, Oil Pressure, Fuel Level, Fuel Pressure and Hourmeter No back clamp, washers, nuts or tools are required to install the gauge into your panel. With its patented mounting design the Snap-In gauge is designed to install easily and reduce costs. Simply push through the mounting hole. The case springs out to hold your gauge in place. A simple push of the fingers installs your gauge securely. No nuts, bolts or bruises required. General: Mounting Hole: 2.063” (53 mm) Depth behind face plate: 3” (76 mm) min. Lighting • LED in multiple colors • Perimeter lit dial • Back lit dial • Also available in an unlit dial version. Dial Graphics • Custom dials and masks available • Add your own logo Termination • 8-pin Molex connector Faria Corporation P. O. Box 983 Uncasville, CT 06382 860.848.9271 Fax: 860.848.2704 Beede Instrument Company, Inc. 88 Village Street Penacook, NH 03303 603.753.6362 Toll-free: 800.451.8255 Fax: 603.753.6201 • Studs for ring connector (Ammeter only) • • • • • Poly carbonate Glass Flat Domed Anti-fog coating available Polished stainless steel Gold Variety of powder coated colors Variety of painted colors • Variety of painted colors

Typical Molex Connections PIN 8 - TACH INPUT PIN 1 - GROUND PIN 4 - SWITCH TO GND PIN 3 - 12V + INPUT PIN 2 - SENDER (NOT USED ON VOLTMETER) Manufactured by the Thomas G. Faria Corporation, Uncasville CT, USA • Copyright and all other rights reserved. Our products are continually being improved. Specifications may change without notice. Snap-In Multifunction Gauges