MG3000
2Pages

MG3000 A user friendly digital engine monitoring and Fuel Management solution. The digital gateway systems, available in the Speedometer or Tachometer, is a feature-rich, intuitive engine monitoring solution for the instrument market. The digital instrumentation communicates directly with the J1939, NMEA2000 and SmartCraft protocols used by the engine ECU providing an important link between the operator and the engine ECU. With just a push of a button the operator can tell the status of the health of the engine including diagnostic messages, fault alerts, and parameter information. With a full featured J1939 interface the MG3000 series instruments provide a complete interface for virtually any SAE J1939 data. FUEL ECON Connect to analog and digital signals to reduce installed costs significantly. The MG3000 and other digital instruments from Faria are fully scalable from a single gauge solution to a full feature multi-gauge applications. Standard Features • Tier 4 Compatible • Fuel Management built in. • Seasonal and Trip Data. • Pop-Up screens for quick information display and warnings. • Alarm codes with suggested actions. • Data log for fault codes. • A single Gateway instrument can monitor up to 5 tanks or other analog signals. • Calibrate Fuel Level and Speed in gauge. • Initialization mode to assist in gauge set-up. • Superior Sunlight readable display. • Units can be displayed in US standard or Metric • Gear position indicators INPUTS • CAN Bus (J1939, NMEA2000 and SmartCraft) • Direct Pressure (30 PSI -200 kP) and (145 PSI - 10000kP) • Analog Inputs 5 Analog inputs are available (Customer specific) Faria Corporation P. O. Box 983 Uncasville, CT 06382 860.848.9271 Fax: 860.848.2704 Beede Instrument Company, Inc. 88 Village Street Penacook, NH 03303 603.753.6362 Toll-free: 800.451.8255 Fax: 603.753.6201 The 128x64 color LCD display, available on the MG3000, provides an easy to read viewing area for system configuration and virtually any data reported by the ECU. The new daylight readable LCD is visible even in direct sunlight. 3000 RPM The display is available with multiple RGB colors. FUEL FLOW 12.3 GPH WATER Cyan Blue The MG3000 can be configured with or with out the three front-mounted push button function selectors. These buttons control the user configurable software and provide access to variable menus and selections. The MG3000 also allows for remote input device for control of the screens and data viewing. Graphics Faria can help design your own custom graphics. Many dial ranges and scales are available including lens type, bezel color, pointer color and back-lighting. Enclosure The enclosure is molded from Poycarbonate plastic with integrated Deutsch style connector shells (sockets) and is sealed against water intrusion in accordance with Ingress Protection (IP) rating IP67. Wires terminate to a sealed Deutsch weatherproof connector. The case is available in three water tight configurations from fully waterproof to vented. Depending on instrument type the case is available in 2, 4 and 5 inch standard hole sizes. www.faria-instruments.com • www.beede.com

Customize to fit your needs. Available in 4 and 5 inch, with or without buttons. A digital stepper motor drives the pointers in Faria’s digital instruments. The stepper motor increases the accuracy and reliability of the instrument while reducing jittery pointers and providing longer life with a lower power requirement. A water tight 12-pin and 6-pin connector is used for plug-in installation. Alarms The MG3000 displays diagnostic messages from the ECU per J1939 format. All DM1 and DM2 diagnostic messages from the Engine ECU are reported. Engine specific diagnostics messages are available...