*mynauticexpo

OZ4097

Product catalog summary

Introduction
This document provides technical specifications and guidelines for lighting fittings designed for use in accommodation areas on vessels. These fittings are intended to be installed in ceilings.

Standards and Regulations
The lighting fittings comply with IEC-598 standards and are approved by various maritime classification societies including PRS, GL, LRS, DNV, ABS, and RMRS.

Construction Details
The body and ring of the fittings are made from either steel or brass sheets. Steel bodies are phosphated and coated with white powder paint, while the rings are Ni/Cr coated. The fittings can be equipped with emergency lighting (B15d, 24V, 25W) and can be customized with non-magnetic bodies or red glass upon request.

Technical Specifications

Model OZ4097 and OZ4098 are available with different configurations.
Light source power ranges from 1x100W to 2x100W, with options for compact fluorescent lamps.
Lampholder types include B22 and E27.
Maximum supply voltage is 250V AC/DC.
Protection grade is IP20.
Fittings are not supplied with light sources.

Installation and Safety
Fittings should not be covered with heat insulation material. Dimensioned drawings and light distribution diagrams are provided for installation guidance.

Conclusion
This document outlines the essential features and specifications of the OZ4097 and OZ4098 lighting fittings, ensuring compliance with maritime standards and offering customization options for specific needs.

Catalog excerpts

OPRAWA OSWIETLENIOWA LIGHTING FITTING Oprawy przeznaczone sa^ do oswietlania pomieszczeñ mieszkalnych na jednostkach plywajacych. Przewidziane sa^ Lighting fittings are purposed for illumination of accommodation There are foreseen to be built-in a ceiling. Korpus i pierscieñ ttoczone sa^z blachy stalowej (OZ4097-01 06, -07 i OZ4098-06, -07). Korpus stalowy jest fosforanowany i malowany biala_ farba^ proszkowq. Pierscieñ pokryty jest powtoka^ Ni/Cr. Pierscieñ z szyba/rastrem mocowany jest do mozna zdjac pierscieñ wraz z szyba/rastrem uzyskujac dostçp Oprawy moga^ bye dostarczane z oswietleniem awaryjnym (B15d, 24V, 25W). Na zyczenie wykonujemy oprawy z materialów niemagnetycznych, z czerwona^szyb^. The body and ring are stamped of steel sheet (OZ4097-01 to - OZ4098-06, -07). The body is phosphated and painted with white powder coating. The ring is covered with Ni/Cr coated. The front ring with glass/louvre are fastened to the body with three screws M4. After loosing these screws it is possible to take off the ring with glass/louvre getting access to the fitting interior. The fitting can be provided with an emergency lighting (B15d, 24V, 25W). On request we can supply the fittings with non- magnetic bodies, red glass. imviv^ix poi AMn e-mail: [email protected] POLAND http://www.famor.com.pl

Open the catalog to page 1

Rysunki gabarytowe Dimensioned drawings otwór w suficie 0309 hole in ceiling 0309 Wykres rozsytu swiatta Light distribution diagram otwór w suficie 0394 hole in ceiling 0394 1) nie okrywac materiatem izolujacym termicznie/ do not cover with heat insulation material Dostawa bez zródet swiatta / Lamps not included 1 ) swietlówka kompaktowa (tylko dia opraw z trzonkiem E27) - zalecana compact fluorescent lamp (only for fittings with E27 lampholder) - e.g. OSRAM DULUX EL15, PHILIPS PL-E/T20

Open the catalog to page 2

All Famor catalogs and brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list