SWIM LADDER SYSTEM SWIM LADDERS Carbon fiber ladder system

SWIM LADDER SYSTEM

SWIM LADDER SYSTEM Exit Carbon fiber swim ladders. Comfortable and safe. On board, the swim ladder is one of the most frequently used accessories. Whether it’s summer or a well-earned warm escape in the colder months, a swim in the sea is one of those timeless pleasures that reconnects us with nature and ourselves. That’s why a swim ladder must be comfortable, easy to deploy, and simple to stow away. And ideally — if it accidentally falls on deck — it should cause no damage. Exit Carbon ladders are designed with exactly these needs in mind. We use 60 mm diameter round steps, generously sized to...

SWIM LADDER SYSTEM Carbon fiber swim ladders Your yacht may need different ladders for different climbs. Exit Carbon Ladders enables you to combine different modules when and where you need them. Our range of ladders is the light, fully customizable carbon fiber swim ladder solution for small yachts to cruising ships. Giotto swimming pool style ladders with 80 cm tall grips, for maximum comfort when at anchor, are available in 6 different widths and with the length going from 3 up to 10 steps, also in 2 parts configuration which gives you 3 different length ladders for the price of one. You can also...

SWIM LADDER SYSTEM Giotto A carbon swim ladder with 80 cm tall grips for climbing comfort and great strength. Starting at 2.5 kg weight (3 steps, 40 cm wide model), it’s as easy and safe as possible to remove and disassemble for easy storage. No risk of damaging your yacht with such a lightweight ladder. It can be ordered in 2 parts configurations to multiply its uses, connecting one or the other or both segments to the grips thus building with the same structure ladders with different lengths. NEW You can also buy folding versions, which can be left installed on the boat, raising out of the water...

SWIM LADDER SYSTEM Giotto ladder mounting scheme On a flat surface, typically a swim platform The Giotto grips are 300 mm deep on the centerline, but of course the ladder cannot be placed right against the hull, otherwise there is no room in front of the steps for the feet. So the maximum centerline distance of the sockets from the deck edge is 225 mm. To leave some room for the socket flange, this means 265 mm of flat surface from the deck edge. MOUNTING POSITIONS IN LIMITED SPACE STANDARD MOUNTING POSITIONS WITH VERTICAL DECK PADS (INCLUDED) NARROW PLATFORM POSITIONS WITH ANGLED DECK PADS (OPTIONAL)...

SWIM LADDER SYSTEM Giotto ladder mounting scheme On the side of the boat, with gunwale To install Giotto on flat areas smaller than 170 mm from the edge, or when going over a gunwale, you cannot use neither the standard Deck Pads, nor the angled ones. In such cases the Grips must be mounted with the reinforcement on the boat side, and they must be spread out approximately 10° each side. This corresponds to the sockets being 100 mm wider than the width of the ladder. STANDARD POSITION On a stern platform or end of flat deck POSITION over a gunwale, by rotating the Giotto handles. ©Exit Engineering...

SWIM LADDER SYSTEM Giotto ladder installation kits Choose the best for your boat Fitting kit for a flat surface, free of obstacles, more than 21 cm long: Standard Sockets with Deck Pads Fitting kit for a flat surface, free of obstacles, less than 21 cm but more than 17 cm long: Standard Sockets with Angled Deck Pads Giotto ladder special kits Special sockets with 6° tapered flange for sloping decks Deck pad extension, for decks only partially covered with teak. Available in 8 or 10 mm thickness. Mounting kit for a flat surface less than 17 cm long (minimum 8 cm), with the ladder farther than 12 cm...

Giotto Solid ladder variants and sizes Installation without Deck Pads (30 sizes available with Stabilized Hull Pads) Widths available Giotto Solid Standard installation with Deck Pads (30 sizes available) • installation on a flat deck with Deck Pads or • installation on limited space or uneven deck with Stabilized Hull Pads

SWIM LADDER SYSTEM • installation on a flat deck with Deck Pads or • installation on limited space or uneven deck with Stabilized Hull Pads

SWIM LADDER SYSTEM

SWIM LADDER SYSTEM Mirò ladder Mirò swim ladders have 35 cm tall grips, for maximum comfort when at anchor, and they are available in 4 different widths starting from 35 cm, and 3 up to 7 steps long, solid or folding. Our Mirò ladders can be installed not only on flat platforms, but also over a toe-rail, or even on both positions! Basically, Miro is the universal ladder with supreme comfort for leisurely baths. ©Exit Engineering

SWIM LADDER SYSTEM • installation on a flat deck with Deck Pad • installation on limited space or uneven deck with Stabilized Hull Pads

SWIM LADDER SYSTEM • installation on a flat deck with Deck Pad • installation on limited space or uneven deck with Stabilized Hull Pads

SWIM LADDER SYSTEM • installation on a flat deck with Deck Pad • installation on limited space or uneven deck with Stabilized Hull Pads

SWIM LADDER SYSTEM Dalì ladder A carbon alternative to the standard ladder most sailors want to have on their stern. Carbon is lighter than aluminium, stronger than steel and doesn’t rust. It can fold up on the swim platform (of course recesses can be made, as with common steel ladders) and be there all the time, as your safety ladder, ready for immediate deployment. You can also detach it from the yacht, by pulling the 2 spring loaded side pins and lifting the ladder. With a starting weight of 2.5 kg (3 steps, 35 cm wide model), this is much easier and safer than any other kind of ladder of...

Dali Solid• 35 sizes available Dali Double • 49 sizes available Dali Solid ladder variants and sizes 35 sizes available er variants and sizes (can be divided for storage)

SWIM LADDER SYSTEM Dali Folding Dali Folding ladder variants and sizes Option Carbon Grip• Combine Dali with Leonardo or Miro Grips ©Exit Engineering 2025